Rosewill user manual Wireless Adapter RNX-N4

Page 37

Wireless Adapter RNX-N4

User Manual

 

 

 

 

 

 

•Enable Wireless: Place a check in this box to enable the wireless interface, it is enabled by default.

•Wireless Network Name: The SSID is a unique named shared amongst all the points of the wireless network. The SSID must be identical on all points of the wireless network and cannot exceed 32 characters.

•802.11 Mode: Select the IEEE 802.11 mode from the drop-down list. For example, if you are sure that the wireless network will be using only IEEE 802.11g clients, then it is recommended to select 802.11g only instead of 2.4 GHz B+G which will reduce the performance of the wireless network. You may also select Mixed 802.11n, 802.11g and 802.11b. If all of the wireless devices you want to connect with this router can connect in the same transmission mode, you can improve performance slightly by choosing the appropriate "Only" mode. If you have some devices that use a different transmission mode, choose the appropriate "Mixed" mode.

•Wireless Channel: Select a channel from the drop-down list. The channels available are based on the country’s regulation. A wireless network uses specific channels in the wireless spectrum to handle communication between clients. Some channels in your area may have interference from other electronic devices. Choose the clearest channel to help optimize the performance and coverage of your wireless network.

•Transmission Rate: Select a transmission rate from the drop-down list. It is recommended to use the Best (automatic) option.

•Channel Width: Select a channel width from the drop-down list.

•Visibility Status: Select Visible or Invisible. This is the SSID broadcast feature. When this option is set to Visible, your wireless network name is broadcast to anyone within the range of your signal. If you're not using encryption then they could connect to your network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID) on the client manually to connect to the network.

•Show Active Clients: Click on this button to view a list of clients that are associated with this device.

•Click on the Save Changes button to store these settings.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Wireless Router RNX-N4 Understanding the Hardware Wireless Adapter RNX-N4 Introduction Features & BenefitsSPI Safety Guidelines Package ContentsRear Panel Wireless Soho Router DescriptionFront Panel System Requirements Network ConfigurationApplications Infrastructure Mode IP Address Configuration Hardware InstallationUnderstanding the Hardware Wireless Adapter RNX-N4 Logging Internet Connection WizardWireless Adapter RNX-N4 Dhcp Connection Dynamic IP Address PPPoE Point-to-Point Protocol over Ethernet Wireless Adapter RNX-N4 Pptp Point-to-Point Tunneling Protocol Wireless Adapter RNX-N4 4 L2TP Layer 2 Tunneling Protocol Static IP Address Configuration Wireless Adapter RNX-N4 ADD a Wireless Device WI-FI Protected Setup WizardWireless Adapter RNX-N4 Using the PIN Using the Push Button Wireless Network Setup Wireless Network Setup WizardAutomatic Network Setup Manual Network Setup Wireless Security Level Best WPA2 Wireless Adapter RNX-N4 Wireless Security Level Better WPA Wireless Security Level None Security Disabled Wireless Security Level Good WEP 64/128-BITWireless Adapter RNX-N4 Advanced WEB Configuration Network Settings WizardWirelessBasic Bridge Mode Wireless Settings Router ModeWireless Adapter RNX-N4 WEP Wired Equivalent Privacy Wireless Security ModeWPA Personal WI-FI Protected Access WPA Enterprise WI-FI Protected Access Pptp WAN SettingsStatic IP Address Configuration Dhcp Connection Dynamic IP Address AddressPppoe POINT-TO-POINT Protocol Over Ethernet Pptp POINT-TO-POINT Tunneling Protocol Maximum Idle Time4.2 L2TP Layer 2 Tunneling Protocol Wireless Adapter RNX-N4 Advanced Advanced WirelessWireless Adapter RNX-N4 Special Applications Virtual ServerPort Forwarding StreamEngine Wireless Adapter RNX-N4 Routing Access Control Wireless Adapter RNX-N4 Wireless Adapter RNX-N4 Address MAC Address Filter Web FilterFirewall Wireless Adapter RNX-N4 Advanced → Virtual Server Inbound Filter Wish Wi-Fi Protected Setup Advanced Network UPNP, WAN Ping… Wireless Adapter RNX-N4 Tools Time Zone SettingSystem Restore the Configuration from a File Save Configuration to a FileSystem Reboot Restore Settings to DefaultSystem Logs Firmware UpgradeSystem Check Dynamic DNSSchedules Status Wireless StatusStatistics Logs StatusWish Session Status Internet Session Status Wireless Adapter RNX-N4 Adsl Appendix a GlossaryAscii CAT BootpDMZ DhcpDNS DSLFTP EAPGUI Https HttpIcmp IeeeISP IPXL2TP LANMTU MppeNAT NICPPP POP3Pptp RadiusSmtp SIPSnmp SohoURL UDPUSB UTPWlan WispWPA Radio Specifications Appendix B SpecificationsHardware Summary Router and GatewayManagement NAT/ NaptEnvironment & Physical Appendix C FCC Interference StatementImportant Note

RNX-N4 specifications

The Rosewill RNX-N4 router is a versatile wireless networking device designed to provide reliable internet connectivity for home and small office environments. It is particularly well-suited for users who require a balance between performance, ease of use, and affordability.

One of the standout features of the RNX-N4 is its compliance with the IEEE 802.11n wireless standard. This standard enables the router to deliver a maximum wireless throughput of up to 300 Mbps, making it ideal for streaming videos, online gaming, and other bandwidth-intensive activities. It is also backward compatible with older wireless standards, such as 802.11g and 802.11b, ensuring that legacy devices can still connect seamlessly.

The Rosewill RNX-N4 utilizes MIMO (Multiple Input Multiple Output) technology, which enhances signal quality and range by using multiple antennas to transmit and receive data simultaneously. This results in better performance in environments with multiple obstacles or interference, ensuring a stable connection even at greater distances from the router.

Another notable characteristic of the RNX-N4 is its user-friendly setup. The router features a web-based user interface that simplifies the configuration process, making it accessible even for users with minimal technical expertise. Additionally, the router supports WPS (Wi-Fi Protected Setup), allowing users to quickly connect compatible devices to the network with the press of a button.

Security is a significant consideration for any networking device, and the RNX-N4 does not disappoint. It supports various modes of encryption, including WEP, WPA, and WPA2, ensuring that users can protect their wireless networks from unauthorized access. The router also features a built-in firewall that adds an additional layer of security against external threats.

The compact design of the Rosewill RNX-N4 makes it easy to position in various locations without taking up much space. It also features multiple Ethernet ports that allow users to connect wired devices for stable, high-speed internet access.

In summary, the Rosewill RNX-N4 is an affordable yet feature-rich wireless router that supports up to 300 Mbps speeds using MIMO technology. It is user-friendly, secure, and versatile enough to handle the demands of modern digital lifestyles. Whether for casual browsing or more intensive online activities, the RNX-N4 is a reliable choice for enhancing home and office connectivity.
Top Page Image Contents