Rosewill RNX-N4 user manual Advanced → Virtual Server

Page 62

Wireless Adapter RNX-N4

User Manual

 

 

 

 

 

 

When a LAN application that uses a protocol other than UDP, TCP, or ICMP initiates a session to the Internet, the router's NAT can track such a session, even though it does not recognize the protocol. This feature is useful because it enables certain applications (most importantly a single VPN connection to a remote host) without the need for an ALG.

•Note: This feature does not apply to the DMZ host (if one is enabled). The DMZ host always handles these kinds of sessions.

•Enabling this option (the default setting) enables single VPN connections to a remote host. (But, for multiple VPN connections, the appropriate VPN ALG must be used.) Disabling this option, however, only disables VPN if the appropriate VPN ALG is also disabled.

•Application Layer Gateway (ALG) Configuration: Place a check in appropriate feature boxes to enable them. . Some protocols and applications require special handling of the IP payload to make them work with network address translation (NAT). Each ALG provides special handling for a specific protocol or application. A number of ALGs for common applications are enabled by default.

1.PPTP: Allows multiple machines on the LAN to connect to their corporate networks using PPTP protocol. When the PPTP ALG is enabled, LAN computers can establish PPTP VPN connections either with the same or with different VPN servers. When the PPTP ALG is disabled, the router allows VPN operation in a restricted way -- LAN computers are typically able to establish VPN tunnels to different VPN Internet servers but not to the same server. The advantage of disabling the PPTP ALG is to increase VPN performance. Enabling the PPTP ALG also allows incoming VPN connections to a LAN side VPN server (refer to

Advanced → Virtual Server).

2.IPSec: (VPN) Allows multiple VPN clients to connect to their corporate networks using IPSec. Some VPN clients support traversal of IPSec through NAT. This option may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try disabling this option. Check with the system adminstrator of your corporate network whether your VPN client supports NAT traversal.

3.RTSP: Allows applications that use Real Time Streaming Protocol to receive streaming media from the internet. QuickTime and Real Player are some of the common applications using this protocol.

4.Windows/MSN Messenger: Supports use on LAN computers of Microsoft

62

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Wireless Router RNX-N4 Understanding the Hardware Wireless Adapter RNX-N4 SPI Features & BenefitsIntroduction Package Contents Safety GuidelinesFront Panel Wireless Soho Router DescriptionRear Panel Applications Network ConfigurationSystem Requirements Infrastructure Mode Understanding the Hardware Hardware InstallationIP Address Configuration Wireless Adapter RNX-N4 Internet Connection Wizard LoggingWireless Adapter RNX-N4 Dhcp Connection Dynamic IP Address PPPoE Point-to-Point Protocol over Ethernet Wireless Adapter RNX-N4 Pptp Point-to-Point Tunneling Protocol Wireless Adapter RNX-N4 4 L2TP Layer 2 Tunneling Protocol Static IP Address Configuration Wireless Adapter RNX-N4 WI-FI Protected Setup Wizard ADD a Wireless DeviceWireless Adapter RNX-N4 Using the PIN Using the Push Button Wireless Network Setup Wizard Wireless Network SetupAutomatic Network Setup Manual Network Setup Wireless Security Level Best WPA2 Wireless Adapter RNX-N4 Wireless Security Level Better WPA Wireless Security Level Good WEP 64/128-BIT Wireless Security Level None Security DisabledWireless Adapter RNX-N4 Advanced WEB Configuration Basic WizardWirelessNetwork Settings Bridge Mode Router Mode Wireless SettingsWireless Adapter RNX-N4 Wireless Security Mode WEP Wired Equivalent PrivacyWPA Personal WI-FI Protected Access WPA Enterprise WI-FI Protected Access WAN Settings PptpStatic IP Address Configuration Address Dhcp Connection Dynamic IP AddressPppoe POINT-TO-POINT Protocol Over Ethernet Maximum Idle Time Pptp POINT-TO-POINT Tunneling Protocol4.2 L2TP Layer 2 Tunneling Protocol Wireless Adapter RNX-N4 Advanced Wireless AdvancedWireless Adapter RNX-N4 Virtual Server Special ApplicationsPort Forwarding StreamEngine Wireless Adapter RNX-N4 Routing Access Control Wireless Adapter RNX-N4 Wireless Adapter RNX-N4 Address Web Filter MAC Address FilterFirewall Wireless Adapter RNX-N4 Advanced → Virtual Server Inbound Filter Wish Wi-Fi Protected Setup Advanced Network UPNP, WAN Ping… Wireless Adapter RNX-N4 Time Zone Setting ToolsSystem Save Configuration to a File Restore the Configuration from a FileRestore Settings to Default System RebootFirmware Upgrade System LogsDynamic DNS System CheckSchedules Wireless Status StatusLogs Status StatisticsWish Session Status Internet Session Status Wireless Adapter RNX-N4 Ascii Appendix a GlossaryAdsl Bootp CATDNS DhcpDMZ DSLGUI EAPFTP Icmp HttpHttps IeeeL2TP IPXISP LANNAT MppeMTU NICPptp POP3PPP RadiusSnmp SIPSmtp SohoUSB UDPURL UTPWPA WispWlan Hardware Summary Appendix B SpecificationsRadio Specifications Router and GatewayNAT/ Napt ManagementImportant Note Appendix C FCC Interference StatementEnvironment & Physical

RNX-N4 specifications

The Rosewill RNX-N4 router is a versatile wireless networking device designed to provide reliable internet connectivity for home and small office environments. It is particularly well-suited for users who require a balance between performance, ease of use, and affordability.

One of the standout features of the RNX-N4 is its compliance with the IEEE 802.11n wireless standard. This standard enables the router to deliver a maximum wireless throughput of up to 300 Mbps, making it ideal for streaming videos, online gaming, and other bandwidth-intensive activities. It is also backward compatible with older wireless standards, such as 802.11g and 802.11b, ensuring that legacy devices can still connect seamlessly.

The Rosewill RNX-N4 utilizes MIMO (Multiple Input Multiple Output) technology, which enhances signal quality and range by using multiple antennas to transmit and receive data simultaneously. This results in better performance in environments with multiple obstacles or interference, ensuring a stable connection even at greater distances from the router.

Another notable characteristic of the RNX-N4 is its user-friendly setup. The router features a web-based user interface that simplifies the configuration process, making it accessible even for users with minimal technical expertise. Additionally, the router supports WPS (Wi-Fi Protected Setup), allowing users to quickly connect compatible devices to the network with the press of a button.

Security is a significant consideration for any networking device, and the RNX-N4 does not disappoint. It supports various modes of encryption, including WEP, WPA, and WPA2, ensuring that users can protect their wireless networks from unauthorized access. The router also features a built-in firewall that adds an additional layer of security against external threats.

The compact design of the Rosewill RNX-N4 makes it easy to position in various locations without taking up much space. It also features multiple Ethernet ports that allow users to connect wired devices for stable, high-speed internet access.

In summary, the Rosewill RNX-N4 is an affordable yet feature-rich wireless router that supports up to 300 Mbps speeds using MIMO technology. It is user-friendly, secure, and versatile enough to handle the demands of modern digital lifestyles. Whether for casual browsing or more intensive online activities, the RNX-N4 is a reliable choice for enhancing home and office connectivity.
Top Page Image Contents