Rosewill L600N manual Wireless Network, 802.11a/n

Page 29

L600N - Dual Band Wireless Router

CONFIGURATION GUIDE

Wireless Setup – Basic Setup

Wireless Network

Wireless Network Name: This is SSID. You can set this to your desired name.

Mode:

2.4G supports the following mode: 802.11b, 802.11b/g, 802.11b/g/n.

5G supports the following mode: 802.11a,

802.11a/n

To fully utilize your L600N, we suggest 2.4G with 802.11b/g/n; 5G with 802.11a/n.

Channel: Set Auto if you are not sure what is the best channel to avoid neighbors’ signal interference. System will pick for you.

Bandwidth:

For 20M, the maximum rate is 130 Mbps (150 Mbps in short preamble);

For 40M bandwidth, the maximum rate is 270 Mbps (300 Mbps in short preamble).

Max Transmission Rate: Select one from the drop- down list that displays all rates that the system supports. Or set at Auto for system to adjust the best transmitting rates for you.

29

Image 29
Contents Page Contents Contents Introduction Product Overview Package ContentFrom Left to Right LED IndicatorBack Panel Indicator Side Panel Indicator Power Off your Modem and Remove the Backup Battery if any Connecting GuideConnecting the L600N Wireless Router to your modem Disconnect and Unplug your Existing RouterUser Name admin Password admin Power on the ModemWAN Interface Setup on Setup Wizard Guide Click on Setup WizardSetup Wizard Guide Adapter 2.4G / 5G Wireless Connecting GuideWireless Setup Click on Wireless Setup then Basic Setup Bandwidth Wireless NetworkMode Security Options Web Management Guide Configuration GuideRunning Status Guest Network Running Status Router StatusLAN Port Internet PortConfiguration Guide Connection Status Statistic InformationRunning Status Client List Network Setup LAN TCP/IP Setup Network Setup LAN Interface SetupConfiguration Guide Network Setup WAN Interface Setup Wireless Setup Region Selection Adapter 2.4G / 5G Wireless Setup Basic Setup802.11a/n Security Options L600N supports 4 wireless security Guest Network Adapter 2.4G / 5G Wireless Setup Guest NetworkKeep Existing Wireless Settings Enable or disable Wireless Setup WPS SetupWPS Settings Enable Broadcom XPress Technology This enables Wireless Setup Advanced SetupConfiguration Guide Configuration Guide Forwarding Broadcast Time To live in hops The time for the broadcast to Forwarding UPnPForwarding Port Forwarding Forwarding Port Triggering Access Control Access Control Time of Day to Block Block Sites Containing these Keywords or Domain Names Access Control Block SitesAllow Trusted IP Address to Visit Blocked Sites Enable Starting Port / Ending Port You can enter the starting Access Control Block ServicesList Access Control QoS SetupIdentify the Connection type and Specific Port Range for Dynamic DNS Use a Dynamic DNS Service enable / disableStatic Route Turn E-mail Notification On Enable or disable E-mail Mail SetupUnder System Tools Security OptionsConfiguration Guide Configuration Guide Configuration Guide Configuration Guide Multicast Control Storage Setup Enable FTP Server Enable / Disable Storage Setup FTP Server SetupFTP Server Account Manager You will need to create an Storage Setup FTP Server Account ManagerStorage Setup USB Browse Storage Setup Samba Setting System Tools Configuration Guide Physical Specification Wireless Apply TroubleshootingIf you have question, Please feel free to contact us Safety Statement