Rosewill L600N manual If you have question, Please feel free to contact us

Page 65

L600N - Dual Band Wireless Router

TROUBLESHOOTING

Problem. My DSL connection is working, but I can not access the internet with L600N.

Solutions. Your Internet Service Provider (ISP) may require the entering of Login and password. To enter, please

click WAN Interface Setup under Network Setup, then select Yes for Does your Internet Connection Require A Login?. Then select PPPoE to enter the connection information provided by your ISP.

Problem. The Setup Wizard does not detect or configure my network.

Solutions. 1. Reset your modem, and power off your L600N by unplug the power adapter then plug back in.

2.Allow the wizard to detect your Internet connection one more time.

3.Static IP: You need to provide a fixed IP setting. Please check with ISP for IP information.

4.DSL Connection: Your internet connection needs login information. Please check with ISP if you do not have on hand.

5.Cable Modem Connection: Cable modem connection may require you to clone MAC address. click WAN Interface Setup under Network Setup, then under Router MAC Address select Use Computer MAC Address or manually enter the MAC address by selecting Use This MAC Address.

Problem. My IP address show up as 169.254.x.x and my computer tells me that I have “Limited or no Connectivity”

Solutions. Check if your computer is set as DHCP setting. Restart you computer and try again. If same thing occur, please try using another computer or the wireless connection.

Problem. I am not getting maximum signal strength when right next to my router.

Solutions. The client may be too close to the router. You may want to step 5 ~ 10 feet away from the router.

You can also change the wireless channel to avoid wireless interference. Recommended channels use are 1, 6, and 11.

Congratulations, L600N is now successfully configured, and your settings are now saved. You may now connect other devices directly to the 4 wired ports on the back panel or connect wirelessly to L600N.

If you have question, Please feel free to contact us:

Support: techsupport@rosewill.com

Call Center: (800) 575-9885

65

Image 65
Contents Page Contents Contents Introduction Product Overview Package ContentFrom Left to Right LED IndicatorBack Panel Indicator Side Panel Indicator Power Off your Modem and Remove the Backup Battery if any Connecting GuideConnecting the L600N Wireless Router to your modem Disconnect and Unplug your Existing RouterUser Name admin Password admin Power on the ModemWAN Interface Setup on Setup Wizard Guide Click on Setup WizardSetup Wizard Guide Adapter 2.4G / 5G Wireless Connecting GuideWireless Setup Click on Wireless Setup then Basic Setup Bandwidth Wireless NetworkMode Security Options Web Management Guide Configuration GuideRunning Status Guest Network Running Status Router StatusLAN Port Internet PortConfiguration Guide Connection Status Statistic InformationRunning Status Client List Network Setup LAN TCP/IP Setup Network Setup LAN Interface SetupConfiguration Guide Network Setup WAN Interface Setup Wireless Setup Region Selection Adapter 2.4G / 5G Wireless Setup Basic Setup802.11a/n Security Options L600N supports 4 wireless security Guest Network Adapter 2.4G / 5G Wireless Setup Guest NetworkKeep Existing Wireless Settings Enable or disable Wireless Setup WPS SetupWPS Settings Enable Broadcom XPress Technology This enables Wireless Setup Advanced SetupConfiguration Guide Configuration Guide Forwarding Broadcast Time To live in hops The time for the broadcast to Forwarding UPnPForwarding Port Forwarding Forwarding Port Triggering Access Control Access Control Time of Day to Block Block Sites Containing these Keywords or Domain Names Access Control Block SitesAllow Trusted IP Address to Visit Blocked Sites Enable Starting Port / Ending Port You can enter the starting Access Control Block ServicesList Access Control QoS SetupIdentify the Connection type and Specific Port Range for Dynamic DNS Use a Dynamic DNS Service enable / disableStatic Route Turn E-mail Notification On Enable or disable E-mail Mail SetupUnder System Tools Security OptionsConfiguration Guide Configuration Guide Configuration Guide Configuration Guide Multicast Control Storage Setup Enable FTP Server Enable / Disable Storage Setup FTP Server SetupFTP Server Account Manager You will need to create an Storage Setup FTP Server Account ManagerStorage Setup USB Browse Storage Setup Samba Setting System Tools Configuration Guide Physical Specification Wireless Apply TroubleshootingIf you have question, Please feel free to contact us Safety Statement