Rosewill L600N manual Wireless

Page 63

L600N - Dual Band Wireless Router

PHYSICAL SPECIFICATION

Wireless

Frequency Band

2.4GHz / 5GHz

 

 

Radio Data Rate

300 + 300 mbps

 

 

Modulation

Support 256/64/16/8-QAM, QPSK, BPSK, MCS0 ~ MCS15

 

 

Security

64/128 bits, WEP, WPA-PSK (TKIP), and WPA2-PSK (AES) wireless encryption

 

 

Antenna Gain

2x 5dBi R-SMA Dual Band Antennas

 

 

Environmental and Physical

 

 

 

Operating : 0~40(32~104)

Temperature.

 

Storage: -40~70(-40~158)

 

 

 

 

Operating: 10% - 90% RH, Non-condensing

Humidity

 

Storage: 5% - 90% RH, Non-condensing

 

 

 

Weight & Dimension

6.5 x 4.72 x 1.18 in (16.5 x 12 x 3 cm) + 0.57 lbs (250g)

 

 

63

Image 63
Contents Page Contents Contents Introduction Product Overview Package ContentFrom Left to Right LED IndicatorBack Panel Indicator Side Panel Indicator Disconnect and Unplug your Existing Router Connecting GuidePower Off your Modem and Remove the Backup Battery if any Connecting the L600N Wireless Router to your modemUser Name admin Password admin Power on the ModemWAN Interface Setup on Setup Wizard Guide Click on Setup WizardSetup Wizard Guide Wireless Connecting Guide Wireless Setup Click on Wireless Setup then Basic SetupAdapter 2.4G / 5G Wireless Network ModeBandwidth Security Options Web Management Guide Configuration GuideRunning Status Guest Network Running Status Router StatusLAN Port Internet PortConfiguration Guide Connection Status Statistic InformationRunning Status Client List Network Setup LAN TCP/IP Setup Network Setup LAN Interface SetupConfiguration Guide Network Setup WAN Interface Setup Wireless Setup Region Selection Adapter 2.4G / 5G Wireless Setup Basic Setup802.11a/n Security Options L600N supports 4 wireless security Guest Network Adapter 2.4G / 5G Wireless Setup Guest NetworkWireless Setup WPS Setup WPS SettingsKeep Existing Wireless Settings Enable or disable Enable Broadcom XPress Technology This enables Wireless Setup Advanced SetupConfiguration Guide Configuration Guide Forwarding Broadcast Time To live in hops The time for the broadcast to Forwarding UPnPForwarding Port Forwarding Forwarding Port Triggering Access Control Access Control Time of Day to Block Access Control Block Sites Allow Trusted IP Address to Visit Blocked Sites EnableBlock Sites Containing these Keywords or Domain Names Starting Port / Ending Port You can enter the starting Access Control Block ServicesList Access Control QoS SetupIdentify the Connection type and Specific Port Range for Dynamic DNS Use a Dynamic DNS Service enable / disableStatic Route Turn E-mail Notification On Enable or disable E-mail Mail SetupUnder System Tools Security OptionsConfiguration Guide Configuration Guide Configuration Guide Configuration Guide Multicast Control Storage Setup Enable FTP Server Enable / Disable Storage Setup FTP Server SetupFTP Server Account Manager You will need to create an Storage Setup FTP Server Account ManagerStorage Setup USB Browse Storage Setup Samba Setting System Tools Configuration Guide Physical Specification Wireless Apply TroubleshootingIf you have question, Please feel free to contact us Safety Statement