You can choose to create several partitions but be aware that if you want to change this at a later point, it’s required to format the drive again or use 3rd party software.
Win98/SE and WinME do not recognize NTFS formatted drives, so if you want to use your drive on those platforms, we recommend you to use FAT32 instead.
If you use this device to backup your data using a
3rd party software running
Partitioning & Formatting
Be aware that this will destroy all your existing data on the drive, so make sure you have a backup! This step is usually only required the first time you install a factory new hard drive, if you change the format or want to erase all data on your drive.
PC running Win98/SE or WinME:
•Type “fdisk” and press Enter
•Select ”Y” and press Enter
•Enter "5” to change the drive
•Select the drive you want to format
•Choose “1” and follow the onscreen instructions
- 9 -