If the system doesn’t recognize the drive, turn on the power first, before connecting the USB/Firewire cable.
Win98 does not support Firewire, you need to upgrade your OS to Win98SE or higher.
The
For safe removal of your drive and to assure that no data is lost, always follow the unplug procedure. If not, an error message will show up.
Installation on a PC (Microsoft Windows)
Win2000 or WinXP with a USB or Firewire connection:
•Turn on your Computer and start Windows
•Connect the RX30 and turn it on
•Let Windows search and install the driver automatically
•Open “My Computer” to see your external hard drive **
Win2000 or WinXP with a Serial ATA connection:
•Turn on your Computer and start Windows
•Connect the RX30 and turn it on
•Let Windows search and install the driver automatically
•Open “My Computer” to see your external hard drive **
Win98SE with a Firewire connection:
•Turn on your Computer and start Windows
•Connect the RX30 and turn it on
•Let Windows search and install the driver automatically
•Open “My Computer” to see your external hard drive **
Win98/SE with a USB connection:
•Turn on your Computer and start Windows
•Insert the driver CD into your
•Connect the RX30 and turn it on (in some cases the driver must be installed before connecting the device, see note on CD or readme file)
•Follow the onscreen instructions and install the drivers
•Open “My Computer” to see your external hard drive **
Unplug Procedure:
•Click on the taskbar icon for external hardware
•Choose your external hard drive and confirm to remove it
**For factory new drives and formatting, see “Partitioning & Formatting”
Copyright . 2004 by Rosewill Inc. - www.rosewill.com | - 7 - |