Riverstone Networks RS 2100 If you have already performed this procedure, make, Default domain

Page 72

Table A-1 Troubleshooting (Continued)

If you experience this difficulty

Try this remedy

 

 

Configuration changes are not reinstated

To save the configuration changes to the Startup

after a reboot.

configuration file, use the procedure in

 

Section 4.3.2, "Saving the Active Configuration to

 

the Startup Configuration File."

The RS 2100 is not resolving DNS names. To set up DNS, use the procedure in Section 4.7,

 

"Setting the DNS Domain Name and Address."

 

If you have already performed this procedure, make

 

sure you can use NS lookup on the DNS server to get

 

the default domain.

 

 

An SNMP manager cannot access the

To set up an SNMP community string and specify a

RS 2100.

target for SNMP traps, use the procedure in

 

Section 4.6, "Setting Up SNMP."

 

If you have already performed this procedure, type

 

snmp show all in the CLI to check the SNMP

 

settings.

 

Use the traceroute and ping commands to verify

 

that the RS 2100 can reach the SNMP management

 

station.

 

 

You are unable to ping a certain host.

Create and add an IP or IPX interface for the host.

 

See the Riverstone Networks RS Switch Router User

 

Guide for information.

A-2 Riverstone Networks RS 2100 Switch Router Getting Started Guide

Page 71 Page 73
Image 72
Page 71 Page 73
Contents RS 2100 Switch Router Getting Started Guide Rev BCopyright Notices This product complies with the following UL 1950 CSA C22.2, No 73/23/EEC EN 60950 IECFCC Part 15 CSA C108.8 89/336/EEC EN 55022 EN EN 61000-3-3 EN 50082-1, AS/NZS 3548 VcciIndustry Canada Compliance Statement Vcci Compliance Statement Equipment Attachment Limitations Notice Page Riverstone NETWORKS, INC Title and Proprietary Rights General Page Riverstone Standard Warranty Page 89/336/EEC 73/23/EECEC Directive 89/336/EEC EC Directive 73/23/EECTable of Contents Troubleshooting Index List of Figures Page List of Tables Page HOW to USE this Guide Related DocumentationFor Information About See Related Documentation Functional Layer Terminology Specifications Feature SpecificationSoftware Overview BridgingPort and Protocol VLANs RoutingIP Routing Layer-4 Switching Quality of ServiceSecurity Web Hosting Features StatisticsManagement Platforms Hardware Overview ChassisExternal Controls LED Label DescriptionMotherboard Features Input voltage Input current maximum100-125 VAC 200-240 VAC Port type Specification FansGigabit Ports LEDs Gigabit ports use the following LEDsPage Safety Considerations Preventing InjuryPreventing Equipment Damage Hardware Specifications Installing the HardwareSpecification Measurement Verifying Your ShipmentInstalling the Chassis Connecting the Serial Management Cable Attaching Cables to the Management PortsSignal RS 2100 port Pin Signal management console port TXD transmit data RXD receive dataa UnusedRXD receive data TXD transmit data Unused RS 2100 Initial Configuration Powering on the RSHere is a partial example Press Return to activate consoleRS 2100 Initial Configuration Starting the Command Line Interface CLI Access ModesAccess Mode Description You are in Boot mode, the command prompt is rs-bootBasic Line Editing Commands Key sequence CommandConfiguration Changes and Saving the Configuration File Activating the Configuration Commands in the ScratchpadFile Descriptions Copy active to startup Viewing the Current Configuration Setting the Basic System Information Here is an exampleSet name rs Copy active to startup Setting UP Passwords Rs# system show active-configIf You Forget Your Passwords Enter the following line to reboot the RSSetting Up Passwords RS 2100 Initial Configuration Setting UP Snmp Setting the Community stringImproving Snmp Security Applying ACLs to SnmpSupported MIBs Layer System Related EnterpriseSetting the DNS Domain Name and Address Enter the following command to add the DNS server to the RSRs# system show dns Setting the Syslog Parameters Message Type DescriptionMessage Type Example FatalSetting the Syslog Parameters Page Managing RS 2100 Software Upgrading System Image SoftwareUse the system image list command to verify the change Rs# system image listUpgrading Boot Prom Software Upgrading Boot Prom Software Loading Software from the Network Loading Image Software from a Tftp ServerEnter the set command to view the changes Here is an example Loading Image Software from a BootP/TFTP Server Loading Software from the Network Appendix a Troubleshooting If you experience this difficulty Try this remedyIf you have already performed this procedure, make Default domainIf you have already performed this procedure, type SettingsAnnotations in configuration files Adding new image to internal flashIf you forget your password Electrostatic discharge ESDIgmp Syslog Viewing active configuration

RS 2100 specifications

Riverstone Networks RS 2100 is a versatile networking solution tailored for service providers and enterprises. Designed to facilitate seamless data, voice, and video services, the RS 2100 presents a robust platform that integrates both hardware and software capabilities. This device stands out in the realm of advanced routing and switching technologies, offering extensive features that cater to a wide array of connectivity needs.

One of the key features of the RS 2100 is its ability to support high-speed interfaces. With multiple Gigabit Ethernet ports, the device ensures substantial bandwidth to handle growing data traffic demands. This makes it an excellent choice for organizations looking to future-proof their networks. Additionally, the RS 2100 supports aggregation of different types of traffic flows, allowing for efficient resource utilization and enhanced performance.

The RS 2100 also boasts advanced Quality of Service (QoS) capabilities, which are essential for prioritizing different types of traffic. This is particularly important for applications that require consistent performance, such as VoIP calls or video streaming. By enabling service providers to guarantee bandwidth for critical applications, the RS 2100 enhances user experience and customer satisfaction.

Security is another critical aspect of the RS 2100, featuring multiple layers of protection against various cyber threats. With support for robust firewall functionalities and various VPN protocols, the device ensures that sensitive data remains secure, thereby fortifying the network against potential attacks.

In terms of scalability, the RS 2100 is highly adaptable. Organizations can easily expand their network capabilities as demands grow, thanks to its flexible architecture. This scalability ensures that users can comfortably accommodate increasing user counts and traffic levels over time without necessitating significant infrastructure changes.

The RS 2100 also integrates seamlessly with existing IT infrastructures. Utilizing standard protocols and interfaces, it simplifies deployment and management processes, allowing organizations to easily incorporate it into their current systems. Overall, Riverstone Networks RS 2100 is a powerful and efficient networking solution, equipped with the features needed to support modern communication demands, ensuring reliability and performance across diverse applications. As businesses and service providers continue to evolve, the RS 2100 serves as a trusted partner in navigating the complexities of networking and connectivity.
Top Page Image Contents