Riverstone Networks RS 2100 manual Equipment Attachment Limitations Notice

Page 6

SAFETY INFORMATION: WICT1-12 T1 CARD

Warning To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

CONSUMER INFORMATION AND FCC REQUIREMENTS

1.This equipment complies with Part 68 of the FCC rules, FCC Registration Number 6TGUSA-46505-DE-N Riverstone Networks Inc. Model WICT1-12 Made in the USA. On the DS1/E1 WAN Module of this equipment is a label that contains, among other information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment. If requested, provide this information to your telephone company.

2.The REN is useful to determine the quantity of devices you may connect to your telephone and still have all those devices ring when your number is called. In most, but not all areas, the sum of the REN's of all devices should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should call your local telephone company to determine the maximum REN for your calling area.

3.If your DS1/E1 WAN Module causes harm to the telephone network, the Telephone Company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice isn't practical, you will be notified as soon as possible. You will be advised of your right to file a complaint with the FCC.

4.Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper operation of your equipment. If they do, you will be given advance notice so as to give you an opportunity to maintain uninterrupted service.

5.If you experience trouble with this equipment DS1/E1 WAN Module, please contact Riverstone Networks Inc., 5200 Great America Parkway, Santa Clara, CA 95054, 408 878-6500, for repair/warranty information. The Telephone Company may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure that the equipment is not malfunctioning.

6.There are no repairs that can be made by the customer to the DS1/E1 WAN Module.

7.This equipment may not be used on coin service provided by the Telephone Company. Connection to party lines is subject to state tariffs. (Contact your state public utility commission or corporation commission for information).

EQUIPMENT ATTACHMENT LIMITATIONS NOTICE

The Industry Canada label identifies certified equipment. This certification means that the equipment meets the telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that the compliance with the above conditions may not prevent degradation of service in some situations.

vi Riverstone Networks RS 2100 Switch Router Getting Started Guide

Page 5 Page 7
Image 6
Page 5 Page 7
Contents RS 2100 Switch Router Getting Started Guide Rev BCopyright Notices FCC Part 15 CSA C108.8 89/336/EEC EN 55022 EN This product complies with the followingUL 1950 CSA C22.2, No 73/23/EEC EN 60950 IEC EN 61000-3-3 EN 50082-1, AS/NZS 3548 VcciIndustry Canada Compliance Statement Vcci Compliance Statement Equipment Attachment Limitations Notice Page Riverstone NETWORKS, INC Title and Proprietary Rights General Page Riverstone Standard Warranty Page EC Directive 89/336/EEC 89/336/EEC73/23/EEC EC Directive 73/23/EECTable of Contents Troubleshooting Index List of Figures Page List of Tables Page HOW to USE this Guide Related DocumentationFor Information About See Related Documentation Functional Layer Terminology Specifications Feature SpecificationPort and Protocol VLANs Software OverviewBridging RoutingIP Routing Layer-4 Switching Quality of ServiceSecurity Web Hosting Features StatisticsManagement Platforms External Controls Hardware OverviewChassis LED Label DescriptionMotherboard Features Input voltage Input current maximum100-125 VAC 200-240 VAC Port type Specification FansGigabit Ports LEDs Gigabit ports use the following LEDsPage Safety Considerations Preventing InjuryPreventing Equipment Damage Specification Measurement Hardware SpecificationsInstalling the Hardware Verifying Your ShipmentInstalling the Chassis Connecting the Serial Management Cable Attaching Cables to the Management PortsSignal RS 2100 port Pin Signal management console port TXD transmit data RXD receive dataa UnusedRXD receive data TXD transmit data Unused RS 2100 Initial Configuration Powering on the RSHere is a partial example Press Return to activate consoleRS 2100 Initial Configuration Access Mode Description Starting the Command Line InterfaceCLI Access Modes You are in Boot mode, the command prompt is rs-bootBasic Line Editing Commands Key sequence CommandConfiguration Changes and Saving the Configuration File Activating the Configuration Commands in the ScratchpadFile Descriptions Copy active to startup Viewing the Current Configuration Setting the Basic System Information Here is an exampleSet name rs Copy active to startup Setting UP Passwords Rs# system show active-configIf You Forget Your Passwords Enter the following line to reboot the RSSetting Up Passwords RS 2100 Initial Configuration Setting UP Snmp Setting the Community stringImproving Snmp Security Applying ACLs to SnmpSupported MIBs Layer System Related EnterpriseSetting the DNS Domain Name and Address Enter the following command to add the DNS server to the RSRs# system show dns Message Type Example Setting the Syslog ParametersMessage Type Description FatalSetting the Syslog Parameters Page Managing RS 2100 Software Upgrading System Image SoftwareUse the system image list command to verify the change Rs# system image listUpgrading Boot Prom Software Upgrading Boot Prom Software Loading Software from the Network Loading Image Software from a Tftp ServerEnter the set command to view the changes Here is an example Loading Image Software from a BootP/TFTP Server Loading Software from the Network Appendix a Troubleshooting If you experience this difficulty Try this remedyIf you have already performed this procedure, type If you have already performed this procedure, makeDefault domain SettingsAnnotations in configuration files Adding new image to internal flashIf you forget your password Electrostatic discharge ESDIgmp Syslog Viewing active configuration

RS 2100 specifications

Riverstone Networks RS 2100 is a versatile networking solution tailored for service providers and enterprises. Designed to facilitate seamless data, voice, and video services, the RS 2100 presents a robust platform that integrates both hardware and software capabilities. This device stands out in the realm of advanced routing and switching technologies, offering extensive features that cater to a wide array of connectivity needs.

One of the key features of the RS 2100 is its ability to support high-speed interfaces. With multiple Gigabit Ethernet ports, the device ensures substantial bandwidth to handle growing data traffic demands. This makes it an excellent choice for organizations looking to future-proof their networks. Additionally, the RS 2100 supports aggregation of different types of traffic flows, allowing for efficient resource utilization and enhanced performance.

The RS 2100 also boasts advanced Quality of Service (QoS) capabilities, which are essential for prioritizing different types of traffic. This is particularly important for applications that require consistent performance, such as VoIP calls or video streaming. By enabling service providers to guarantee bandwidth for critical applications, the RS 2100 enhances user experience and customer satisfaction.

Security is another critical aspect of the RS 2100, featuring multiple layers of protection against various cyber threats. With support for robust firewall functionalities and various VPN protocols, the device ensures that sensitive data remains secure, thereby fortifying the network against potential attacks.

In terms of scalability, the RS 2100 is highly adaptable. Organizations can easily expand their network capabilities as demands grow, thanks to its flexible architecture. This scalability ensures that users can comfortably accommodate increasing user counts and traffic levels over time without necessitating significant infrastructure changes.

The RS 2100 also integrates seamlessly with existing IT infrastructures. Utilizing standard protocols and interfaces, it simplifies deployment and management processes, allowing organizations to easily incorporate it into their current systems. Overall, Riverstone Networks RS 2100 is a powerful and efficient networking solution, equipped with the features needed to support modern communication demands, ensuring reliability and performance across diverse applications. As businesses and service providers continue to evolve, the RS 2100 serves as a trusted partner in navigating the complexities of networking and connectivity.
Top Page Image Contents