Rose electronic CRK-2DFSUD2D manual Transmitter to Receiver cabling, Cable type Maximum distance

Connect the local USB model transmitter as shown below (single or dual video). A USB hub is used for local keyboard and mouse connections to the computer.

To 2nd DVI	To 2nd DVI
Graphic card	local monitor

	To 1st DVI		To 1st DVI	To CPU USB or USB hub
	Graphic card		local monitor	for keyboard and mouse
Transmitter to Receiver cabling
Cable type		Maximum distance
62,5µm Multimode-Fiber		650 ft / 200 m
50.0µm Multimode-Fiber		1300ft / 400m
9.0µm Singlemode-Fiber		33,000ft / 10,000m
9.0µm Singlemode-Fiber		6,500 ft / 2,000m (3.2 GBit model)

Table 1.transmitter to receiver cabling

Applying power

With all cable connections made, plug in the provided power adapters to a 110/220-volt source and to the power connector on the transmitter and receiver Unit. Only use the power adapter provided. The red LED next to the power connector indicates power is applied to the unit.

CRYSTALVIEW DVI FIBER INSTALLATION AND OPERATIONS MANUAL 7