Hint
It is suggested to keep the DHCP server related parameters in default state to keep machine in best performance.
After confirming the modification you’ve done, Please click on the Modify button to macke the changes effective.
WAN IP address configuration via web configuration interface
Execute your web browser, and insert the IP address (default: 172.16.0.1) of VIP in the adddress bar.
After logging on machine with username/password (default: admin / 123), browse to “WAN Setting” configuration menu, you will see the configuration screen below:
Connection Type |
|
| Data required. |
|
|
|
|
|
|
Obtain IP Address |
|
| In most circumstances, it is no need to configure the DHCP |
|
Automatically |
|
| settings. |
|
|
|
|
|
|
Specify an IP Address |
|
| The ISP will assign IP Address, and related information. |
|
|
|
|
|
|
PPPoE |
|
| The ISP will assign PPPoE username / password for Internet |
|
|
| access, |
| |
|
|
|
| |
|
|
|
|
|
Hint
Please consult your ISP personnel to obtain proper PPPoE/IP address related information, and input carefully.
If Internet connection cannot be established, please check the physical connection or contact the ISP service staff for support information.
Save Modification to Flash Memory
Most of the VoIP router parameters will take effective after you modify, but it is just temporary stored on RAM only, it will disappear after your reboot or power off the VoIP router, to save the parameters into Flash ROM and let it take effective forever, please remember to press the Save Modification button after you modify the parameters.
13