Planet Technology VIP-320 user manual VoIP Call Out

VoIP Call Out

This page defines the routing rule for Call out to VoIP. (User key in the phone number through phone set dial pad, then VoIP router translate the phone number by the routing table setting here to destination IP, and dial out number then call out via network protocol).

Each time when you off hook the phone connected to this VoIP router, you will hear a dial tone to remind you to key in the phone number, after you input the number you called, if digits of the number of you called is not exceed the Max Digits, please remember to press the # key for ending the input.

	Parameter Description
		Define the maximum digits wait for user key in for all VoIP Call Out, if
MaxDigits		user key in digits match the number defined here. It will go to translate
		for call out rule without needed to press # key.
		Define the waiting seconds for user key in phone number first digit. User
FirstDigitTime		need to key in first digits before the seconds defined here, if VoIP router
		wait over the defined seconds and there is no any digits key in, the VoIP
		router will feedback the user busy tone.
		Define the waiting seconds for user key in phone number secondary &
OtherDigitTime		the rest digits. User need to key in the rest digits before the seconds
		defined here, if VoIP router wait over the defined seconds and there is
		no any digits key in, the VoIP router will feedback the user busy tone.
Remark		Remark for this routing rule. Please use UNDERLINE to replace the
		SPACE due to HTTP protocol limitation.
Area Code		Define the Prefix number fit this rule, any phone number prefix digits
		matched with the rule will call out by this rule define. Please Notify there
	20