Planet Technology VIP-320 user manual Line Setting

Page 18

Error Message

Line Setting

Server

For some reason (ex. All lines of this VoIP router are busy), here will display the failure information of last time VoIP Call in.

This page will setup the phone line information each port.

 

Parameter Description

 

 

 

Port

 

display FXS interfase the port number.

 

 

 

 

 

Telephone interface type:

Interface

 

FXO: for connect to telephone line or PBX extension line.

 

 

FXS: for connect to regulate phone set.

 

 

 

Name

 

Line name for this port. This will send and display on the remote side

 

due VoIP call

 

 

 

 

 

Line Number

 

Telephone number assigned to this line.

 

 

 

 

 

Transmitter Gain. This will adjust the speaker volume of local phone set.

TxGain

 

The adjust range is from +3 to -13dB. Higher value will cause louder

 

 

sound come from local phone set.

 

 

 

 

 

Receiver Gain. This will adjust the microphone volume of local phone

RxGain

 

set. The adjust range is from -3 to +13dB. Higher value will cause

 

 

amplifier the sound get from local phone set.

 

 

 

Inbound

 

Enable or disable the VoIP call to Internet. Disable the inbound will not

 

allow any call made call to Internet from phone set.

 

 

 

 

 

Outbound

 

Enable or disable the VoIP call from Internet. Disable the Outbound will

 

not allow any call made call from Internet to phone set.

 

 

 

 

 

Hotline

 

When Enable, it will allow you to make a VoIP call without Key in any

 

 

 

18

Image 18
Contents User’s manual Copyright Introduction System Maintenance Firewall/Security Feature OverviewVoIP Functions Package Content Dect FeaturesPhysical Details LED Display & Button LineNumber 0 -9 and # Keypad and button definition on DCT-100DCT-100 installation Chapter Preparations & Installation Physical Installation RequirementLAN/WAN Interface quick configurations LAN IP address configuration via web configuration interfaceWAN IP address configuration via web configuration interface Page Configuring and monitoring your VIP-320 from web browser Overview on the web interface of VIP-320 Manipulation of VIP-320 via web browser VIP-320 main VIP-320 Status Line Setting Tone Config VoIP Call Out IP Address Min DigitsMax Digits StripVoIP Call Profile DeleteFrom MaximumMinimum Line NoServer Alert Profile Forward DeleteDtmf Relay Call SetupTunneling FAX RelayCall Forwarding Package FrameFast Start On Busy OtherAlways No AnswerProxy Register ServerServer1 1SIP OutboundProxyWebCall WebCall Config Delete Stop Set WelcomePassword System ConfigBridge Mode Setting Basic SetupLAN to WAN Access Rules WAN to LAN Access Rules Dynamic DNS SettingMachine Status Dhcp Server Setting Static RoutingVirtual Server Reboot System System MaintenanceConfigurations Save Modification to Flash MemoryPeer-to-Peer P2P mode Appendix a Voice communicationsMachine configurations on the VIP-280/VIP-320 Voice communication via SIP proxy server -SIP50Hint Test the scenario Appendix B VIP-320 Specifications Dect