Admin Privilege
Reset to Factory Default
The Reset to Factory Default page allows you to reset the modem to original factory default configuration (factory.reg).
Diagnostic Test
Click this link; system will perform diagnostic tests automatically. And show the testing result in Diagnostic Test page. If some of the tests fail, related help links are available for reference while troubleshooting.
Figure 6-11: Diagnostic Test Result Screen
Code Image Update
The Code Image Update page allows you to upgrade the image code locally. Browse the location of firmware file, and click the Upload to start the update.
Network Code Image Update
The Network Code Image Update page allows user to upgrade the image code from remote FTP server.
Assume an FTP server stores the updated image on Internet. Click Image Download to initiate the updating. To set up the ftp server IP address, please save the UpdateHost parameter under [Class\ Service\System] in the config.reg file as the IP address of the specific Ftp server on Internet.
43