Planet Technology user manual Login And System Status, Preparation, Connecting to ADE-3000

Page 10

ADE-3000 User Manual

Chapter 3

3

Login And System Status

This Chapter details the first time login procedure and the Status screen

Login

ADE-3000 contains an HTTP server. This enables you to connect to it, and configure it, using your Web Browser. Your Browser must have JavaScript support. The configuration program has been tested on the following browsers:

Netscape V4.08 or later

Internet Explorer V4 or later

Preparation

Before attempting to configure ADE-3000, please ensure that:

Your PC can establish a physical connection to ADE-3000. The PC and ADE-3000 must be directly connected (using the ETHERNET port on ADE-3000) or on the same LAN segment.

ADE-3000 must be installed and powered ON.

If ADE-3000's default IP Address (10.0.0.2) is already used by another device, the other device must be turned OFF until ADE-3000 is allocated a new IP Address during configuration.

Connecting to ADE-3000

To establish a connection from your PC to ADE-3000:

1.After installing ADE-3000 in your LAN, start your PC. If your PC is already running, restart it.

2.Start your WEB browser.

3.In the Address box, enter "HTTP://" and the IP Address of ADE-3000, as in this example, which uses ADE-3000's default IP Address:

http://10.0.0.2

4.If connection is established, a pop-up password request page will show up. The default login User Name of ADE-3000 administrator is “admin”, and Password is “conexant”. The default login User Name for non-administrator is “user”, and Password is “password”.

6

Image 10
Contents Adsl Bridge Router Disclaimer Table of Contents Network Code Image Update Internet Access Features ADE-3000 FeaturesIntroduction Package Contents Front Panel Physical DetailsRear Panel Choose an Installation Site InstallationInstallation Procedure System RequirementsConnect WAN Cable Power UpCheck the LEDs Connecting to ADE-3000 Login And System StatusLogin PreparationIf you cant connect Status HomeLAN Per VC Setting WAN configurationSystem Wide Settings OverviewInternet connection services Bridge Mode5Encapsulation types of Bridge mode Disconnect Timeout Service NameUser Name and Password AuthenticationFixed IP for WAN Dynamic IP for WAN Service Category BandwidthSystem Configuration Page LAN Configuration Dhcp SettingNAT Settings Ethernet Mode Setting16NAT configuration NAT Virtual Servers 19Enter Session name and User’s IPTo add a Virtual Server Bridge FilteringSource MAC DNS Configuration 23DNS Configuration Screen TCP/IP Settings PC ConfigurationWindows Clients Windows 9x/ME Windows 5Network Configuration Win Using a fixed IP Address Use the following IP Address Windows XP Internet Access Windows 9x/2000Macintosh Clients Linux ClientsWAN Status Admin PrivilegeATM Status PPP Status ATM Status ScreenTCP Status Route TableAdsl Configuration Learned MAC TableGateway RIP ConfigurationSupplier MulticastPassword Configuration 8RIP Configuration ScreenFTP server Miscellaneous ConfigurationWAN side Http server Tftp serverDhcp Relay PPP connect on WAN accessDMZ Host IP Dhcp Target IPCode Image Update Reset to Factory DefaultDiagnostic Test Network Code Image UpdateSystem Log 12System Log ScreenGeneral Problems TroubleshootingConfiguration and Internet Access Reconnect it? Specifications ADE-3000CE Marking Warning
Related manuals
Manual 52 pages 43.06 Kb