Peavey GTX owner manual Matrix Module

Page 19

CENTURY SERIES

GTX

Matrix Module

The Matrix module allows the creation of an independent mix using the Main outputs and an external inputs as signal sources.

Matrix Meter

Shows output level of matrix module, 0dB=+4dBu.

Matrix AUX IN Controls

Controls level of external balanced input signals.

L & R MAINS Controls

Controls level of post fader L & R signals from main section.

MONO MAINS Control

Controls the level of post fader Mono signal from main sec- tion.

STR PGM IN Control

Controls level of Stereo Program being input into the matrix from the mono master module circuit.

LEFT/MONO/RIGHT Switches

Selects which stereo program in signals are introduced into the matrix.

GROUPS 1-4 Controls

Adjusts the level of Group signals 1-4 introduced into the matrix.

GROUPS 5-8 Controls

Adjusts the level of Group signals 5-8 introduced into the matrix.

MUTE Switch with LED

Mutes the output. This switch does not affect the PFL switch or the Peak and Signal Present LED indicators.

TB ENABLE Control

Injects the talkback signal from the Master section into the matrix.

PFL Switch

Samples the matrix signal pre-fader and allows for monitoring within the master section of the console. This signal is not affected by the Mute switch. When depressed, the signal level can be seen on the Solo meters, and heard via the mixer’s headphone or local monitor output. When this PFL switch is depressed, the PEAK LED illuminates at a lower intensity. When used as a status indicator of switch position, the Peak LED indicating circuit remains fully operational by illuminat- ing at a much higher intensity than its use as a PFL status indi- cator.

PEAK LED Indicator

Illuminates RED when any of the points monitored come with- in 3db of the clipping point. Signal is sampled after the sum- ming stage and after the fader. This LED also serves as a PFL ON indicator, but at a much lower intensity than when it is used to indicate clipping.

SIGNAL PRESENT LED

Constantly displays level activity of the matrix by varying in intensity.

MATRIX OUTPUT LEVEL

Used for control of the Matrix output of the channel.

PAGE 17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents GTx Crest Audio Inc Table of Contents Feature Overview Input XLR Output XLR Wiring ConventionsGroup Module Connections Group Out Input Module Connections Direct OutInsert Send Bal Insert ReturnStereo Program Master Module Connections Matrix Out A&BMono Out Right OutCentury Series Console Power Supply Console Cooling Power ConnectionsSystem Connections Signal ProcessorsOutput Connections GTx Input Module AUX 5&6 PRE/POST Switch EQ in SwitchPRE/POST Switch Aux 8 Direct SwitchAUX Level 1&2 / 3&4 GTx Stereo Input ModuleGain & R Gain Controls Three-Band Sweep Equalizer ControlsPRE/POST Switch 7&8 PRE/POST Switch 1&2 / 3&4PRE/POST Switch 5&6 Stereo SwitchEFX Return GTx Group Modules Matrix Matrix AUX Mains Left Right 6MONO STR PGM Matrix Module AUX GTx Master Section Mono Peak & Signal LED’s Mono Assignment SwitchesMono Matrix Post Switches Mono PFL SwitchesAUX Meters GTx Meter Bridge 52 & 64 Frame ModelsGTx Meter Bridge 44 Frame Model Page GTx Configurations General Specifications GTx ConsoleArchitect’s & Engineer’s Specifications Century GTx Block Diagram Side Dimensions RearViews DimensionsModule Location Option Title Function GTx USER-OPTIONSThree Remove rear screws Console DisassemblyONE Open the armrest TWO Remove front module screwPage GTx Glossary Direct Out Jack Bus Assignment SwitchesDC Power Indicators Center MeterInsert Switch w/LED Fader Reverse SwitchHF Peak/Shelve Switch High Pass Filter AdjustableLine Input Jack Matrix Post SwitchMute Switch Oscillator/Pink In ConnectorPre/Post Aux Fader Switches PAN SwitchPhantom Power PhaseTalkback Microphone Input Stereo Program In ConnectorTalkback Enable Switch XLR Microphone Input ConnectorPage Appendix C Schematics Crest Audio Inc
Top Page Image Contents