GTx Master Section

CENTURY SERIES

GTX

The master section is the control center for the GTx console. Monitoring, talkback, PFL, Stereo Program In, Master Aux & Matrix, L-C-R, internal oscillator and Scene Muting functions are all controlled here.

Lamp Dim Control

Controls the intensity of the lighting devices plugged into the XLR sockets on the back of the meter bridge.

Talkback Mic Input

Allows for a microphone to be plugged in for use with the talk- back system. An additional Talkback Mic Input jack can be found next to the headphone jack on the front-right of the con- sole under the arm rest.

Power Indicators

These four LED’s indicate the status of the four voltages used by Century Series consoles.

Headphone Jack

Delivers right and left output, unless a PFL switch is depressed. Whenever any signal is in PFL mode, the head- phone jack will deliver that signal. An additional headphone jack is located beneath the hand rest on the right-front part of the console.

Headphone Level Control

Controls the signal level delivered to the headphone jacks.

L, R & Mono Matrix Sends

Controls level of Right, Left and Mono signals sent to the two matrices.

Local Monitor Level Control

Controls level of signal delivered to the monitor outputs.

Auxiliary Mutes

Mutes the respective auxiliary sends.

PFL Defeat

Disables PFL function to the local monitor, allowing local monitor output to function as an additional left/right output.

Dim Switch

This switch introduces a -12 dB attenuation into the local mon- itor and headphone outputs. It is disabled when PFL defeat is depressed, auto-active when TB is on.

Mono Switch

Switches the local monitor output from standard stereo mode to a mono mode.

Stereo Program In Gain

Adjusts the gain of the Stereo Program In signal.

Stereo Program In EQ

Two-band fixed frequency (10kHz and 80Hz) EQ that affects the Stereo Program In signal.

Stereo Program In Assignments

Assigns the Stereo Program to the associated buses.

Local Monitor Mute

Mutes the local monitor signal output.

Aux Master Controls

Controls final output signal level of the auxiliary outputs.

Aux AFL Switches

Switch the eight auxiliary outputs to After Fader Listening mode, via normal PFL signal path. Aux outputs can be moni- tored as stereo pairs if both AFL switches are depressed. If only one is depressed, that AUX is monitored in mono.

External Oscillator Switch

Turns on the internal oscillator or accepts signal from the1/4" TRS Oscillator input jack.

External Talkback Input Switch

Selects the external talkback input XLR as an input signal to the talkback section and overrides the Oscillator.

Stereo Program Balance

Adjusts balance of stereo signal from Stereo Program input.

Stereo Program Level

Controls final output signal level of the Stereo Program.

Talkback Level Control

Controls the level of the selected talkback source.

External Talkback Output Switch

Turns on the external talkback XLR.

Stereo Program Mute

Mutes the output of the stereo program.

Stereo Program PFL

Allows Pre-fader Listening of the Stereo Program signal.

Talkback Assignment Switches

Assigns talkback signal to outputs, groups and/or auxes.

Blend Level

Controls level of L & R signal blended to assigned auxes.

Blend Assignment Switches

Assigns the Left and Right signals to the respective auxes thru blend-level pot.

Talkback On/Off Switch

Turns the talkback system on and off.

Matrix Master Levels (A&B)

Controls the final output level of the respective matrix.

Matrix Master Mutes (A&B)

Mutes the respective matrix signal.

Matrix Master AFL (A&B)

Allows After-Fader Listening of the respective matrix signal.

Matrices A&B can be monitored as a stereo pair if both AFL's are pressed; if one button is pressed, only one of them is moni- tored.

Scene Mute Master Switches

Turn on and off the four Scene Mutes.

Aux Scene Mute On/Off Switch

Turns the Aux Scene Mute system on and off.

L/R/Mono Mute Switches

Mute outputs of Left, Right and Mono signals respectively.

PAGE 19