Samsung HT-SK5 instruction manual Setting the Delay Time, Press Cursor , 5 to set the Delay Time

Page 27

Setting the Delay Time

1 Press MENU button.

 

 

Press Cursor button

 

 

to move to ‘Audio’ and

 

2 then press ENTER

 

 

 

 

 

button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press Cursor button

3 to move to ‘DELAY TIME’ and then press ENTER button.

Press Cursor , ,

4 , buttons to move to the desired speaker and then press ENTER button.

Press Cursor , 5 to set the Delay

time

You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC.

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and Surround Speakers.

51

Setting CENTER SPEAKER

If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance between Df and Dc

Delay Time

 

 

20 Inches

1.3 ms

40 Inches

2.6 ms

5 feet

3.9 ms

6 feet 6.6 inches

5.3 ms

 

 

Setting REAR (SURROUND) SPEAKERS

If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance between Ds and Dc

Delay Time

 

 

6 feet 6.6 inches

5.3 ms

13 feet 3.3 inches

10.6 ms

20 feet

15.9 ms

 

 

Ideal CENTER

SPEAKER placement

Ideal

SURROUND SPEAKER placement

It is desirable to place all speakers within this circle.

Df: The distance from FRONT SPEAKER

Dc: The distance from CENTER SPEAKER52

Ds: The distance from SURROUND SPEAKER

Image 27
Contents AH68-01241T Valley Road, Suite Mount Arlington, NJ SamsungClass 1 Laser Product Safety Warnings PrecautionsUpon completion of any service or repairs All operating and use instructions should be followedSlots and openings in the cabinet are provided Contents Copy Protection Playable DiscsDescription AccessoriesInsert Remote Batteries Connecting the Speakers Component Video Best Quality Connecting the Video to TVComposite Video Good Quality Video Better QualityConnecting an External Analog Component Connecting an External Digital ComponentCooling Fan Temporary measureIs good, then fasten it to a wall or other rigid surface Terminal. Keep the AM loop antenna connectedTV Broadcast System Power cord intoPower supply Press Mode buttonCorresponding Direct Play 1, 2, 3, 4 Disc PlaybackEach time the Remain button is pressed Displaying Disc InformationPress Info button Press the Remain buttonSkipping Scenes/Songs Fast/Slow PlaybackPress Enter Button at the end of the segment Repeat PlaybackPress Repeat button Press Info button twicePress Enter button Angle FunctionZoom Function ButtonPress Cursor , 3 buttons to move to Chapter display 1Press Info buttonButtons to select the desired subtitle Press the numeric buttonsJpeg File Playback Jpeg Press Menu button Using the Title MenuUsing Disc Menu Press Menu button to exit the setup screenPress Cursor Button to select Setting the LanguagePress Menu Button43PS Adjusting the TV Aspect Ratio Screen SizePress Menu button 43LBEnter the password Then press Enter button Setting Parental Controls Rating LevelPress Cursor button to Setting the PasswordPress OPEN/CLOSE Setting the Wallpaper Jpeg DVD VCDPress Return button to return to the previous level To Change the WallpaperSetting the Speaker Mode Setting the Test Tone Press Test Tone buttonTo end the test tone Setting Rear Surround Speakers Setting the Delay TimePress Cursor , 5 to set the Delay Time Setting Center SpeakerPress Sound Edit button and then press Cursor Setting the Audio QualityPress DSP/EQ button Press Cursor Adjust the ‘DRC’Sound Field DSP/EQ Function Press Cursor button toDolby Pro Logic II Effect Dolby Pro Logic II ModeListening to Radio Presetting StationsConvenient Functions Adjusting Display BrightnessTV Brand Code Number When operating the TV with the remote controlPress Power button to turn on the TV Point the remote control toward the TVPicture quality is poor Before Calling for ServiceDisc is rotating but no Picture is producedSpecifications Movies, these movies are numbered as Title 1, Title 2, etc Be chosen from the menu displayed on the TV monitorDVD player, the player cannot play the disc Subtitle languages