Samsung HT-SK5 Connecting an External Digital Component, Connecting an External Analog Component

Page 10

Connecting External Components

Connecting an External Digital Component

Example: Digital signal components such as a DVD or CD Recorder.

Optical Cable (not included)

Connecting an External Analog Component

Example: Analog signal components such as a VCR, Camcorder, and TV.

CONNECTIONS

VIDEO IN

VIDEO OUT DIGITAL OUT

Audio Cable

If the external

analog component has only one Audio Out, connect either left or right.

L

Video Cable

R

VIDEO IN

VIDEO OUT

1 Connect Video Out on the DVD player to Video In on the TV.

2 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.

3 Press AUX on the remote control to select ‘DIGITAL IN’.

•Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.

•You can also use the FUNCTION button on the main unit.

The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.

17

1 Connect Video Out on the DVD player to Video In on the TV.

2 Connect Video In on the DVD player to Video Out on the external analog component.

3 Connect Audio In on the DVD player to Audio Out on the external analog component.

•Be sure to match connector colors.

4 Press AUX on the remote control to select AUX 1 or AUX 2.

•Each time the button is pressed, the selection changes as follows: DIGITAL IN AUX 1 AUX 2.

•You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.

Note

•If you have connected an external digital component and Video In (1, 2) at the same time, there will be video from AUX 1 even when you select DIGITAL IN.

•If you have connected Audio In (L, R) to 1, connect Video In to 1 as well, and if you have connected Audio In (L, R) to 2, connect Video In to 2 also.

18

Image 10

Contents Valley Road, Suite Mount Arlington, NJ Samsung AH68-01241TSafety Warnings Precautions Class 1 Laser ProductAll operating and use instructions should be followed Upon completion of any service or repairsSlots and openings in the cabinet are provided Contents Playable Discs Copy ProtectionAccessories DescriptionInsert Remote Batteries Connecting the Speakers Video Better Quality Connecting the Video to TVComposite Video Good Quality Component Video Best QualityConnecting an External Digital Component Connecting an External Analog ComponentTerminal. Keep the AM loop antenna connected Temporary measureIs good, then fasten it to a wall or other rigid surface Cooling FanPress Mode button Power cord intoPower supply TV Broadcast SystemDisc Playback Corresponding Direct Play 1, 2, 3, 4Press the Remain button Displaying Disc InformationPress Info button Each time the Remain button is pressedFast/Slow Playback Skipping Scenes/SongsPress Info button twice Repeat PlaybackPress Repeat button Press Enter Button at the end of the segmentButton Angle FunctionZoom Function Press Enter buttonPress the numeric buttons 1Press Info buttonButtons to select the desired subtitle Press Cursor , 3 buttons to move to Chapter displayJpeg File Playback Jpeg Press Menu button to exit the setup screen Using the Title MenuUsing Disc Menu Press Menu buttonButton Setting the LanguagePress Menu Press Cursor Button to select43LB Adjusting the TV Aspect Ratio Screen SizePress Menu button 43PSSetting Parental Controls Rating Level Enter the password Then press Enter buttonSetting the Password Press Cursor button toTo Change the Wallpaper Setting the Wallpaper Jpeg DVD VCDPress Return button to return to the previous level Press OPEN/CLOSEPress Test Tone button Setting the Speaker Mode Setting the Test ToneTo end the test tone Setting Center Speaker Setting the Delay TimePress Cursor , 5 to set the Delay Time Setting Rear Surround SpeakersSetting the Audio Quality Press Sound Edit button and then press CursorPress Cursor button to Press Cursor Adjust the ‘DRC’Sound Field DSP/EQ Function Press DSP/EQ buttonDolby Pro Logic II Mode Dolby Pro Logic II EffectPresetting Stations Listening to RadioAdjusting Display Brightness Convenient FunctionsPoint the remote control toward the TV When operating the TV with the remote controlPress Power button to turn on the TV TV Brand Code NumberPicture is produced Before Calling for ServiceDisc is rotating but no Picture quality is poorSpecifications Subtitle languages Be chosen from the menu displayed on the TV monitorDVD player, the player cannot play the disc Movies, these movies are numbered as Title 1, Title 2, etc