Manuals / Canon / Computer Equipment / Printer

Canon Q T 1 0 8 5 1 V 0 1, 3301B002 warranty Wired Networks, Set the Network Connection Type

Models: Q T 1 0 8 5 1 V 0 1 3301B002

1 38

Download 38 pages 39.02 Kb

Page 28

dConfirm that a checkmark appears next to the selected device, then click Exit.

Wired Networks

Congratulations! You are finished with the setup.

Go to "Start Using Your MX860!" on page 37.

router

If you will be connecting your MX860 to a wired LAN (Local Area Network) using an Ethernet cable, follow the steps below.

1Make sure the MX860 is ready

Ensure the MX860 is connected to your computer with the USB cable and is powered on

You will need the USB cable only for the initial network setup. Once your MX860 is connected to your network, the USB cable is no longer needed.

2Set the Network Connection Type

The MX860 is set at the factory to connect to a wireless (Wi-Fi) network.

To connect to a wired network using an Ethernet cable, change the network connection type from the MX860 panel.

a On the MX860, press the Menu button.

b Use the ◄ or ► button to select Settings, then press the OK button. c Select Device Settings, then press the OK button.

28

Image 28

Canon Q T 1 0 8 5 1 V 0 1, 3301B002 warranty Wired Networks, Set the Network Connection Type

Contents

Getting Started for Mac Users Page Contents Prepare Your MX860 Getting Started OverviewBefore Starting Check your box contents Unpack and Set UpRemove all packing materials Connect a phone or answering machine for fax setup Connect the phone line for fax setupConnect the power cord Power up Select language Set Up the Hardware Install the Print HeadWith the power on, open the paper output tray Raise the print head lock lever Unpackage the print head Lower the print head lever until it locks into place Install the Ink Tanks Unwrap the first ink tankRemove protective cap Insert the ink tank into the print head Load Paper Close the coverPress the OK button Remove the cassette Align the Print Head Slide the guides to match the paper sizeConfirm paper stack does not exceed the limit Slide the cassette back in until it clicks into place Select best pattern Look at the first printoutPress OK again to print the third pattern Set Up to Receive Faxes Set Up Your Fax Sender Information Set Up the SoftwareInstall the Software Insert the Setup disc Click Easy Install Double-click the Setup icon on your screen Click Restart Click OK Connect to Your Network optional Choose Your Network Type Select printer to use Wireless Networks with a Single Access PointMake sure the MX860 is ready Complete the network setup Select your wireless networkClick Next Select the printer Review resultsClick Add Add the printer Click Add Select scanner Wireless Networks with Multiple Airport Access Points Enter network name If settings are correct, click FinishClick Next Enter your network passphrase, then click Next Review results Add the Printer OS X Click Apply to use the MX860 as a scanner Wired Networks Set the Network Connection Type Check Wired LAN Connection reminder appears Click Yes to close the Check Wired LAN Connection reminder Connect the Ethernet cable Disconnect the USB cable, then click OK Add the Printer OS X Add the Printer OS X Connecting Additional Computers Click Cancel Printer Browser window opens. a Select MX860 series Select the Scanner Solution Menu Start Using Your MX860On-Screen Manual Getting Help from Canon