Connect the Ethernet cable | Canon Q T 1 0 8 5 1 V 0 1, 3301B002

5Connect the Ethernet cable

a Remove the LAN connector cap from the back of the MX860 (located just above the USB connection).

bConnect the MX860 to your network with an Ethernet cable (not included).

								Do not attempt to connect the supplied phone cord to


the LAN port. Do not confuse the LAN port											with the telephone
the LAN port. Do not confuse the LAN port											with the telephone
jacks									.

6Click Yes to close the Check Wired LAN Connection reminder

If the MX860 is not detected automatically, the Set Printer IP Address dialog appears.

The TCP/IP Setting of Get IP address automatically is correct for most networks. If your network uses pre-assigned IP addresses (also called fixed or static addresses), select Use following IP address in the pop-up menu and enter the appropriate information, then click Connect.

30

Image 30

Canon Q T 1 0 8 5 1 V 0 1, 3301B002 Connect the Ethernet cable, Click Yes to close the Check Wired LAN Connection reminder

Contents

Getting Started for Mac Users Page Contents Getting Started Overview Prepare Your MX860Before Starting Unpack and Set Up Check your box contentsRemove all packing materials Connect the phone line for fax setup Connect a phone or answering machine for fax setupConnect the power cord Power up Select language With the power on, open the paper output tray Set Up the HardwareInstall the Print Head Raise the print head lock lever Unpackage the print head Lower the print head lever until it locks into place Remove protective cap Install the Ink TanksUnwrap the first ink tank Insert the ink tank into the print head Press the OK button Load PaperClose the cover Remove the cassette Confirm paper stack does not exceed the limit Align the Print HeadSlide the guides to match the paper size Slide the cassette back in until it clicks into place Look at the first printout Select best patternPress OK again to print the third pattern Set Up to Receive Faxes Set Up the Software Set Up Your Fax Sender InformationInstall the Software Insert the Setup disc Click Easy Install Double-click the Setup icon on your screen Click Restart Click OK Connect to Your Network optional Choose Your Network Type Wireless Networks with a Single Access Point Select printer to useMake sure the MX860 is ready Select your wireless network Complete the network setupClick Next Review results Select the printerClick Add Add the printer Click Add Select scanner Wireless Networks with Multiple Airport Access Points If settings are correct, click Finish Enter network nameClick Next Enter your network passphrase, then click Next Review results Add the Printer OS X Click Apply to use the MX860 as a scanner Wired Networks Set the Network Connection Type Check Wired LAN Connection reminder appears Click Yes to close the Check Wired LAN Connection reminder Connect the Ethernet cable Disconnect the USB cable, then click OK Add the Printer OS X Add the Printer OS X Connecting Additional Computers Click Cancel Printer Browser window opens. a Select MX860 series Select the Scanner Start Using Your MX860 Solution MenuOn-Screen Manual Getting Help from Canon