Click Apply to use the MX860 as a scanner | Canon 3301B002 specification

2Add the printer

a Click More Printers. b Select MX860 series. c Click Add.

Add the Printer (OS X v10.3.9)

The Printer List window will open automatically.

1Click Add

The Printer Browser window opens.

aSelect MX860 series.

bClick Add.

Select the Scanner

The Canon IJ Network Scanner Selector dialog opens.

1Select scanner

a From the pop-up menu, select Canon MX860 series Network.

b In the Network Device List pane, select the MAC address of the MX860.

There should be only one device listed unless you have more than one MX860 series device connected to your network.

cClick Apply to use the MX860 as a scanner.

prepare hardware softwarenetwork

27

Image 27

Canon 3301B002, Q T 1 0 8 5 1 V 0 1 warranty Click Apply to use the MX860 as a scanner

Contents

Getting Started for Mac Users Page Contents Getting Started Overview Prepare Your MX860Before Starting Unpack and Set Up Check your box contentsRemove all packing materials Connect the phone line for fax setup Connect a phone or answering machine for fax setupConnect the power cord Select language Power up Raise the print head lock lever Set Up the HardwareInstall the Print Head With the power on, open the paper output tray Lower the print head lever until it locks into place Unpackage the print head Insert the ink tank into the print head Install the Ink TanksUnwrap the first ink tank Remove protective cap Remove the cassette Load PaperClose the cover Press the OK button Slide the cassette back in until it clicks into place Align the Print HeadSlide the guides to match the paper size Confirm paper stack does not exceed the limit Look at the first printout Select best patternPress OK again to print the third pattern Set Up to Receive Faxes Set Up the Software Set Up Your Fax Sender InformationInstall the Software Double-click the Setup icon on your screen Insert the Setup disc Click Easy Install Click OK Click Restart Choose Your Network Type Connect to Your Network optional Wireless Networks with a Single Access Point Select printer to useMake sure the MX860 is ready Select your wireless network Complete the network setupClick Next Review results Select the printerClick Add Add the printer Select scanner Click Add Wireless Networks with Multiple Airport Access Points If settings are correct, click Finish Enter network nameClick Next Enter your network passphrase, then click Next Review results Add the Printer OS X Click Apply to use the MX860 as a scanner Set the Network Connection Type Wired Networks Check Wired LAN Connection reminder appears Connect the Ethernet cable Click Yes to close the Check Wired LAN Connection reminder Disconnect the USB cable, then click OK Add the Printer OS X Add the Printer OS X Connecting Additional Computers Click Cancel Printer Browser window opens. a Select MX860 series Select the Scanner Start Using Your MX860 Solution MenuOn-Screen Manual Getting Help from Canon