II
CONNECTING GAS DRYERS (cont.)
Ak WARN ING: Toreducetheriskoffire,
electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:
•Installation and service must be performed by a qualified installer, service agency, or the gas supplier. Failure to do so can result in fire, explosion, or death.
•Use only a new stainless steel flexible connector and a new
•A gas shutoff valve must be installed within 6 ft. (1.8 m) of the dryer. Failure to do so can result in fire, explosion, or death.
•The dryer is configured for Natural Gas when shipped from the factory. Make sure that the dryer is equipped with the correct burner nozzle for the type of gas being used (Natural Gas or Liquefied Petroleum). Failure to do so can result in fire, explosion, or death.
•If necessary, the correct nozzle (for the LP nozzle kit, order part number 4948EL4002C) should be installed by a qualified technician and the change should be noted on the dryer. Failure to do so can result in fire, explosion, or death.
•All connections must be in accordance with local codes and regulations. Failure to do so can result in fire, explosion, or death.
•Gas dryers MUST exhaust to the outdoors. Failure to do so can result in fire, explosion, or death.
Connecting the Gas Supply
NOTE: This dryer is configured from the factory set for Natural Gas (NG). If dryer is to be used with LP gas, it must be converted by a qualified service technician.
@Make sure that the gas supply to the laundry room is turned OFF and the dryer is unplugged. Confirm that the type of gas available in your laundry room is appropriate for the dryer.
O Remove the shipping cap from the gas fitting at the back of the dryer. Be careful not to damage the threads of the gas connector when removing the shipping cap.
O Connect the dryer to your laundry room'sgas supply using a new flexible stainless steel connector with a 3/8 in. NPT fitting.
NOTE: DO NOT use old connectors.
O Securely tighten all connections between the dryer and your laundry room's gas supply.
OTurn on your laundry room's gas supply.
O Check all pipe connections (both internal and external) for gas leaks with a noncorrosive
O Proceed to Venting the Dryer on page 14.
3/8" NPT Gas | 1/8" NPT Pipe Plug | |
| ||
Connection |
|
|
|
| Gas Supply |
Shutoff Valve | ||
Stainless | Steel |
|
Flexible | Connector |
|
High-Altitude Installations
The BTU rating of this dryer is
If your gas dryer is being installed at an elevation above 10,000 feet, it must be derated by a qualified technician or gas supplier.
11
II
