Kenmore 796.8051 manual Time and Status Display, Estimated Time Remaining Check Vent Indicator

II

TIME AND STATUS DISPLAY

The Time and Status Display shows the estimated time remaining, cycle progress, and vent status. When the dryer is turned on, the display will illuminate.

Small	Load
Delicates
	--	U_er	W ,14_
Express	Dry
				Soft
Touch	Up		I	START/PAUSE
				Loud
	Low	Damp Dry	20	Off

Air/Rack Dry

O	ESTIMATED		TIME REMAINING				_) CHECK VENT INDICATOR
	When a cycle		is selected, the display will			indicate the	(DUCT BLOCKAGE SENSING SYSTEM)
	default time for that cycle. Once the cycle					is started,	The CHECK VENT duct blockage sensing system
	the	estimated	time will be displayed.		This	displayed	detects and alerts you to blockages in the ductwork
	time	may fluctuate		during the cycle	depending on the		that	reduce	exhaust flow from the dryer. This light
	conditions of the			load in the dryer.			does	not indicate any problems with your dryer. If this
							light blinks, it indicates that your home's exhaust sys-
_)	LINT FILTER INDICATOR						tem has a serious restriction, which is not covered by
							your	dryer's warranty. Call 1-800-4-MY-HOME ® for
	The dryer automatically detects reduced airflow
							information regarding duct cleaning services offered
	caused by a full lint filter. The Check Lint Filter indica-
							through Sears.
	tor will light before each load as a reminder to check
	the lint filter before starting each load for maximum
	efficiency. Always			clean the lint filter	before every		CONTROL		LOCK INDICATOR
	cycle.						When Control Lock is set, the Control Lock indicator
							will appear and all buttons are disabled. This pre-
(_	CYCLE STATUS INDICATOR						vents children from changing settings while the dryer
							is operating.
	This portion of the display shows which stage of the
	drying cycle is currently underway (DRY, COOLING,
	or WRINKLE		GUARD).

22

II