12
POWER | INPUT SELECT |
TV SOURCE |
MAIN/
AMP/TV ZONE2 BD/DVD
|
|
| 1 | 2 | 3 |
|
|
| 6 |
|
|
|
|
|
| MUTE |
|
3 | 4 | 5 | VOL | ASC | TUNING |
| / CH | ||||
|
|
| |||
|
|
| MEMORYTUNER | SUB WOOFER | MO/ST |
1 | MULTI ZONE | 4 | Tuner Preset Mode | BD/DVD SAT TV/AUX1 | CD |
2 | Indicator | 5 | Volume Control | MULTI CH VCR/AUX2 | iPod |
|
| ||||
3 | Function | 6 | Tuner Preset Frequency |
|
|
M In ZONE2 FM mode, you can switch only between the preset channels that you have specified in the main zone.
ZONE2 is enabled only for an analog input source; the digital source is not applicable. If you still encounter a failure after following all these instructions, check if the input source is of the analog type. You cannot listen to one FM program in the main zone and a different program in the sub zone.
You can use MUTE on the remote control to mute the output sound of ZONE2.
Main Zone : Off, Zone 2 : On | It is possible to change into the state of "Main Zone : On, Zone 2 : On" from the state of |
"Main Zone : Off, Zone 2 : On" . |
|
AUDIO SETUP
Selecting a source device and connection jack (Digital Audio In)
Select the external devices you have connected to the receiver.
1.Press the SETUP/MENU button on the remote control.
•Each time the button is pressed, the mode switches between
SETUP ENTER and SETUP OFF.
2. | Press the ENTER button to select SETUP ENTER. | Æ |
3. | Press the ▲▼ buttons to select AUDIO SETUP, and then press the |
ENTER or ► button.
4. Press the ▲▼ buttons to select a desired jack.
• Devices switch as follows; BD/DVD, SAT, TV, CD
Æ
- To exit setup mode -
•Press the SETUP/MENU button on the remote control.
SETUP OFF appears on the display and Setup Mode is exited.
M You can also use the SETUP, ,,.,<, >, ENTER buttons on the front of your AV Receiver.
ENG
● BASIC FUNCTIONS OF YOUR AV RECEIVER
35
