SETTING THE SPEAKER SIZE
Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration and whether certain speakers are used or not.
1.Press the SETUP/MENU button on the remote control.
•Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF. |
|
2. Press the ENTER button to select SETUP ENTER. | Æ |
3.Press the ▲▼ buttons to select SPK SIZE, and then press the ENTER or ► button.
4. Press the ▲▼ buttons to select the speaker you want, and then press the
ENTER or ► button. | Æ | |
• Each time you press the ▲▼ buttons, FRONT | CENTER SURR |
|
| ||
SBACK(DPLllX) FRONTH(DPLllZ) SUBW | CROVR will be | |
selected in turn. |
|
|
5.Press the ▲▼ buttons to set the mode (LARGE, SMALL etc.) for the selected speaker.
6.Repeat steps
- To exit setup mode -
•Press the SETUP/MENU button on the remote control. SETUP OFF appears on the display and Setup Mode is exited.
Setting the Speaker
SPEAKER | Possible Settings | Default Setting |
|
|
|
FRONT (Front) | LARGE, SMALL | SMALL |
CENTER (Center) | LARGE, SMALL, NONE | SMALL |
|
|
|
SURR (Surround) | LARGE, SMALL, NONE | SMALL |
|
|
|
SBACK (Surround Back) | LARGE, SMALL, NONE | SMALL |
FRONTH (Front Height) | LARGE, SMALL | SMALL |
SUBW (Subwoofer) | YES, NO | YES |
|
|
|
CROVR (Crossover Frequency) | 60, 80, 100,120, 150, 180, 200(Hz) | 100Hz |
•LARGE : Select when using large speakers. You can listen to full range sound.
•SMALL : Select this when using small speakers.
•NONE : Select when no speaker is used.
•YES (subwoofer) : Select when using the subwoofer speaker.
•NO (subwoofer) : Select when not using the subwoofer speaker.
•CROVR : Select the crossover frequency for the best bass response in your speakers.
M You can also use the SETUP, ,,., <, >, ENTER buttons on the front of your AV Receiver.
When the Front speaker is only set to LARGE, you can select LARGE of other speakers.
When the Surround speaker is only set to LARGE, you can select LARGE of SBACK (Surround Back) speaker.
ENG
● SETUP
41
