![HDMI SETUP](/images/new-backgrounds/20385/20385103x1.webp)
Setup
HDMI SETUP
Use this if you want to receive audio from HDMI connected external devices.
1.Press the SETUP/MENU button on the remote control.
•Each time the button is pressed, the mode switches between SETUP ENTER and
SETUP OFF.
2. | Press the ENTER button to select SETUP ENTER. |
| |
Æ | |||
3. | Press the ▲▼ buttons to select HDMI SETUP, and then press the ENTER or ► button. |
4.Press the ▲▼ buttons to select the option you want, and then press the ENTER or ► button.
5.Press the ▲▼ buttons to set the HDMI Setup mode you want.
• HDMI SYNC : ON, OFF
The AV receiver can be set to automatically correct any delay between the video and | Æ | |
the audio, based on the data from the connected TV. | ||
| ||
- ON : HDMI Sync is enabled. |
| |
- OFF : HDMI Sync is disabled. |
|
• HDMI AUDIO : AVR(Audio Video Receiver), TV This preference determines whether audio received at the HDMI IN is output by the
HDMI OUT.
If you want to listen to audio from an HDMI connected external device through your HDMI connected TV's speakers, set it to TV. Otherwise, leave it on AVR to listen to audio from the A/V receiver.
- AVR : HDMI audio is not output | - TV : HDMI audio is output |
•HDMI ANYNET+ : ON, OFF
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control.
-ON : Anynet+ is enabled.
-OFF : Anynet+ is disabled.
•TV ARC : AUTO , OFF
If you use the HDMI cable to connect between HDMI IN of an Audio Return
-AUTO : The audio signal from the TV can be sent to the HDMI OUT of the main unit.
-OFF : Turn TV ARC funtion off.
M HDMI Audio is enabled only if both the HDMI INPUT and HDMI OUT are connected properly and working normally.
HDMI Sync function works only if your HDMI compatible TV supports this function.
If ANYNET+ is set to OFF, TV ARC will be set to OFF accordingly that cannot switch to AUTO.
The TV ARC function will be active only via the HDMI OUT terminal.
VARIABLE SET (Low Power Consumption SETUP)
This function enhances electric power efficiency.
1.Press the SETUP/MENU button on the remote control.
•Each time the button is pressed, the mode switches between SETUP ENTER and
SETUP OFF.
2.Press the ENTER button to select SETUP ENTER.
3.Press the ▲▼ buttons to select VARIABLE SET, and then press the ENTER or ► button.
4.Press the ▲▼ buttons to select ON or OFF.
•ON :This is Samsung's electric power efficiency function, you can save about 30 % for power consumption.
•OFF: Normal power efficiency function.
Æ
Æ
M This function is not available after the Tone Control, Speaker Level, SFE mode or ASC is changed from the factory setting.
52