Marantz DV7110 manual Setting Up the Player, TV System switch, RS-232C Control Connection

TV SYSTEM switch

(except for USA model)

Video output changes as follows according to the playback disc’s recorded format.

NTSC → PAL, PAL → NTSC conversion is possible on Video CDs. PAL → NTSC conversion is not possible on DVDs. When the TV SYSTEM switch is set to the AUTO position, the disc’s format will be output as is. When a CD or disc is not loaded, the previous video output format will be selected.

AUTO NTSC

PAL

TV

SYSTEM

Disc				Output format
Type	Format		Position of TV SYSTEM switch
		NTSC		PAL	AUTO
DVD	NTSC	NTSC		MOD. PAL	NTSC
	PAL			PAL	PAL
Video CD	NTSC	NTSC		MOD. PAL	NTSC
	PAL	NTSC		PAL	PAL
CD, No disc		NTSC		PAL	NTSC or PAL

About MOD. (Modulation) PAL

•SHRINK

Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage.

•If your PAL TV does not have a V Hold control, you may not be able to view NTSC disc because the picture may roll. If the TV has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically,

leaving black bands at the top and bottom of the screen. This is not a malfunction; it is caused by the NTSC → PAL conversion.

RS-232C Control Connection

This player can be controlled by a PC. Connect the player and a serial port on the PC with a 9-pin RS-232C straight cable. See RS-232C System Control Section (Page 51) for detail.

RS-232C switch

To control this DVD player by a PC, set the RS-232C switch on the rear panel to RS-232C.

								Y
					L	1		C		IN
RC-5/6 RS-232C	RS-232C							/P
RS-232C CONTROL
					R	2		C		OUT
								/P
	CODE	EXTERNAL	COMPONENT	2	1	VIDEO	S2	COMPONENT	COAXIAL	OPTICAL
	DVD 1 DVD 2	INTERNAL	VIDEO/S2
	REMOTE		VIDEO		AUDIO		VIDEO		DIGITAL	REMOTE
	CONTROL		OUTPUT		OUTPUT		OUTPUT		OUTPUT	CONTROL

RC-5/6 RS-232C	RS-232C
RS-232C CONTROL

RS-232C

ENGLISH

Setting Up the Player

Using the Setup Navigator

The Setup Navigator has been designed to simplify the process of getting the DVD player ready to perform. Designed as a series of on-screen multiple-choice questions, the Setup Navigator automatically sets the audio, video, and language settings according to how the questions are answered. Once this procedure is complete, it will be possible to begin using the DVD player to enjoy DVDs.

The procedure on this page describes the operations necessary to function within the Setup Navigator screens. A detailed description of the contents of each question that appears on the screen can be found on the following pages.

When setting up for the first time

Some DVDs start playing automatically when loaded in the player. Because the Setup Navigator cannot be used if a disc is playing, it is recommended to set up the player using the Setup Navigator before loading a DVD for the first time. If a DVD has been loaded, be sure to press STOP 7 before proceeding.

	OPEN/CLOSE			1
	VIDEO ON/OFF	A-B REPEAT	RANDOM
	1	2	3
	4	5	6
	7	8	9
	T-C	+10	CLEAR
		0
	TOP		MENU
	MENU
3				4
	RETURN		ENTER
	ANGLE	SUBTITLE	AUDIO
	PROGRAM	OSD	LAST
			MEMORY
2	SETUP	CONDITION
		DIMMER	MEMORY

REMOTE CONTROLLER

RC7010DV

1

DVD PLAYER DV7110

STOPPLAY

A-B	REPEAT	SHUFFLE	SVCD		SCAN	CHAPTER	TITLE	TRACK
TITLE	DTS	CHAPTER	TRACK	PBC	FTS	TOTAL	TRACK	TIME

FL OFF

		PAUSE
DIMMER	VIDEO OFF	OSD

1

MAKING CONNECTIONS

/ SETTING UP THE PLAYER

15