MGE UPS Systems EX-5, EX-7, EX-11RT manual Setup and Installation

EX 5/7/11RT Systems

section description page

Section 2 Setup and Installation

2.0	Scope	.2 — 1
2.1	Unpacking and Parts Check	.2 — 1
2.2	Contents of Standard EX 5/7/11RT Systems	.2 — 2
2.3	Installation in Tower Configuration	.2 — 4
2.4	Installation in Rack Mounting Configuration	.2 — 5

2.4.1Adjustment of front panel logo and control panel

for rack orientation	.2 — 5
2.4.2 Prepare Battery Module for Rack Mounting	.2 — 6

2.4.3Power, Battery, Transformer, and CLA Charger Module

	Rack Mounting	. .	2 — 7
2.5	Communication Ports	. .	2 — 9
2.5.1	Connecting the RS232 Communication Port	. .	2 — 9
2.5.2	Connecting the Dry (Relay) Contact Communication Port . . . .2		— 10
2.5.3	Installation of Optional Transverse Card	.2	— 10
2.6	Remote Emergency Power Off (REPO) Communication Port .	.2	— 12
2.7	System Connections	.2	— 13

2.7.1Connections with Common Normal and Bypass AC

sources (Single Mains)	.2 — 13
2.7.2 Connecting EX RT Transformer Module	.2 — 15

2.7.3Connections with Separate Normal and Bypass AC

sources (2 Mains) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 — 16

	2.7.4 System Connections as Frequency Converter
		(without Bypass AC source)	.2 — 17
	2.8	Connection of Battery Module EXB	.2 — 18
	2.9	Connection of Optional CLA Module	.2 — 19
Section 3	Operation
	3.0	Scope	. .3 — 1
	3.1	Initial Startup	. .3 — 1
	3.2	UPS Personalization	. .3 — 2
	3.2.1 Accessing personalization with front panel buttons		. .3 — 2
	3.3	Information Technology (IT) Network and Industrial
		Operating Modes	. .3 — 5
	3.3.1 UPS personalization through external software		. .3 — 6
	3.3.2	Final startup sequence	. .3 — 6
	3.4	Operating Modes	. .3 — 7
	3.4.1 Normal (double conversion) Mode		. .3 — 7
	3.4.2	ECO Mode	. .3 — 8
	3.5	Operation on Battery Power	. .3 — 9
	3.5.1 Transfer to Battery Power		. .3 — 9
	3.6	Return of Normal AC source	.3 — 10
	3.7	Shutdown	.3 — 10

c ii Contents 86-86000-00 B00