Installation and User Manual
3.4Operating Modes
3.4.1 Normal (double conversion) Mode
Figure 3-4: Normal (double conversion) mode.
15
LOAD LEVEL 4kW / 5 kVA
OFFON
21 22
15 16
REMAINING TIME
10 minutes
OFFON
This is the standard operating mode, set by the factory.
Two possible cases.
1.If Normal AC source available:
15LED is ON.
The load is protected by the UPS.
Scroll down 21 or scroll up 22 function buttons allow you to read the UPS measurements (Normal AC source voltage, Bypass AC source voltage, operating mode, battery capacity and UPS Serial Number).
2.If Normal AC source not available:
CAUTION: Do not operate the Manual Bypass switch when the UPS is in Normal mode.
15LED flashes.
16LED is ON.
The audible alarm sounds intermittently.
The load is now powered by the UPS battery. This display shows remaining
Operation | 3 — 7 |
