Installation and User Manual
2.4Installation in Rack Mounting Configuration
2.4.1 Adjustment of front panel logo and control panel for rack orientation.
NOTE | If system includes the Transformer Module, we recommend to mount the Battery |
| Module on the bottom, then mount the Power Module above the Battery Module |
| and mount the Transformer Module on top for optimum stability. |
|
|
To prepare the front panel logo and LCD display for rack orientation, of all modules. (including Transformer or CLA Module, if equipped).
Proceed as follows:
1.Unclip logo plate, and pull the LCD display from front panel.
2.Rotate them 90 degree counter clockwise as shown.
3.Place items back onto the panel.
Figure 2-4: Typical orientation of the logo and control panel. (Power Module shown)
www.mgeups.com
OFFON
E X | 1 1 | R T |
|
EX
11 TR 
ON OFF
1
www.mgeups.com
2
3
| O | EX |
| FF | 1 |
|
| 1 |
|
| RT |
| NO |
|
E X | 1 1 | R T |
| ||
|
| ON |
OFF |
|
|
FINISHED PANEL (rack orientation)
1
2
3
Installation | 2 — 5 |
