Fostex FM-3 owner manual Selecting the meter mode, Selecting the status display

Selecting the meter mode

You can select the meter mode from stereo, mono L and mono R. By default, it is set to the stereo mode.

The meter mode setting remains even after you turn off the unit. If you initialize the flash memory using the system status display, it is reset to the default setting (see page 20).

(1)Press the [METER] key long enough to enter the meter select mode.

The meter mode icon is shown at the bottom of the display.

<Note>: If you do not press any key for approxi- mately five seconds while the meter mode icon is shown, the icon automatically disappears and the unit exits the meter select mode.

(2)Press the [+] or [-] key to select the desired meter mode.

Stereo meter mode

Press the [-] key	Press the [+] key
	Mono meter (L) mode

Press the [-] key Press the [+] key

Mono meter (R) mode

(3)Immediately after selecting the desired meter mode, press the [EDIT] key to exit the meter select mode.

Selecting the status display

In the status display mode, not only you can check the status for the input, output, meter and system, but also you can edit setting.

(1)Press the [STATUS] key long enough to enter the status display mode.

The display shows the input status display.

(2)Press the [+] or [-] key to select the desired status display.

Input status display

Press the [-] key Press the [+] key

Output status display

Press the [-] key Press the [+] key

	Meter status display
Press the [-] key	Press the [+] key

System status display

(3)Press the [EDIT] key to exit the status display mode.

For details about the contents of each status display and parameter setting, see the next page.

15