Samsung HT-SK5 Sound Field DSP/EQ Function, Press Cursor button to, Press DSP/EQ button

Page 29

Setting the DRC (Dynamic Range Compression)

You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

 

1

Press MENU button.

 

2

 

 

Press Cursor button to

 

 

 

 

 

 

 

 

 

 

 

 

move to ‘Audio’ and then

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

press ENTER button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sound Field (DSP)/EQ Function

DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments. EQ: You can select from ROCK, POP, or CLASSIC, depending on the genre of music.

Press DSP/EQ button.

"DSP" appears on the display panel.

Each time the button is pressed, the selection changes as follows:

 

3

Press Cursor button to

 

move to ‘DRC’ and then

 

press ENTER button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Press Cursor ,

to

adjust the ‘DRC’.

 

 

 

 

The longer the Cursor button is held down, the greater the effect, and the longer Cursor button is held down, the smaller the effect.

Once the setup is complete, you will be taken to the previous screen.

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

55

Note

POP, JAZZ, ROCK: Depending on the genre of music, you can select from POP, JAZZ, and ROCK.

STUDIO : Provides a sense of presence as if in a studio.

CLUB : Simulates the sound of a dance club with a throbbing bass beat.

HALL : Provides a clear vocal as if listening in a concert hall.

MOVIE: Provides the feeling of a movie theater.

CHURCH: Gives the feel of being in a grand church.56

PASS: Select this for normal listening.

Image 29
Contents AH68-01241T Valley Road, Suite Mount Arlington, NJ SamsungClass 1 Laser Product Safety Warnings PrecautionsSlots and openings in the cabinet are provided Upon completion of any service or repairsAll operating and use instructions should be followed Contents Copy Protection Playable DiscsDescription AccessoriesInsert Remote Batteries Connecting the Speakers Composite Video Good Quality Connecting the Video to TVVideo Better Quality Component Video Best QualityConnecting an External Analog Component Connecting an External Digital ComponentIs good, then fasten it to a wall or other rigid surface Temporary measureTerminal. Keep the AM loop antenna connected Cooling FanPower supply Power cord intoPress Mode button TV Broadcast SystemCorresponding Direct Play 1, 2, 3, 4 Disc PlaybackPress Info button Displaying Disc InformationPress the Remain button Each time the Remain button is pressedSkipping Scenes/Songs Fast/Slow PlaybackPress Repeat button Repeat PlaybackPress Info button twice Press Enter Button at the end of the segmentZoom Function Angle FunctionButton Press Enter buttonButtons to select the desired subtitle 1Press Info buttonPress the numeric buttons Press Cursor , 3 buttons to move to Chapter displayJpeg File Playback Jpeg Using Disc Menu Using the Title MenuPress Menu button to exit the setup screen Press Menu buttonPress Menu Setting the LanguageButton Press Cursor Button to selectPress Menu button Adjusting the TV Aspect Ratio Screen Size43LB 43PSEnter the password Then press Enter button Setting Parental Controls Rating LevelPress Cursor button to Setting the PasswordPress Return button to return to the previous level Setting the Wallpaper Jpeg DVD VCDTo Change the Wallpaper Press OPEN/CLOSETo end the test tone Setting the Speaker Mode Setting the Test TonePress Test Tone button Press Cursor , 5 to set the Delay Time Setting the Delay TimeSetting Center Speaker Setting Rear Surround SpeakersPress Sound Edit button and then press Cursor Setting the Audio QualitySound Field DSP/EQ Function Press Cursor Adjust the ‘DRC’Press Cursor button to Press DSP/EQ buttonDolby Pro Logic II Effect Dolby Pro Logic II ModeListening to Radio Presetting StationsConvenient Functions Adjusting Display BrightnessPress Power button to turn on the TV When operating the TV with the remote controlPoint the remote control toward the TV TV Brand Code NumberDisc is rotating but no Before Calling for ServicePicture is produced Picture quality is poorSpecifications DVD player, the player cannot play the disc Be chosen from the menu displayed on the TV monitorSubtitle languages Movies, these movies are numbered as Title 1, Title 2, etc