JVC LCT1616-001A, GM-V42C manual Adjusting the Screen Size and Position, To reset the adjustments

To make an adjustment while viewing the adjustment bar

After step 3 on page 16, proceed as follows:

1Press 5/∞ to move the cursor (3) to “sub menu.”

2Press 3 to display the Sub Menu.

The Sub Menu for CONTRAST appears on the screen.

C O N T R A S T	: + 0 1
–		+

3 Press 3 to display the Size/Position

Adjustment Menu.

S I Z E / P O S I T I O N A D J .
H S I Z E		: + 0 1
H P O S I T I O N		: 0 0
V S I Z E			: – 0 2
V P O S I T I O N		: 0 0
D O T C L O C K		: 0 0
C L O C K P H A S E		: 0 0			*
s u b m e n u
r e s e t
A D J U S T :	S E L E C T :		E X I T :
				M E N U

3Press 5/∞ to select the Sub Menu you want to adjust. Each time you press the button, the Sub Menu changes as follows:

CONTRAST BRIGHT CHROMA

SHARPNESSPHASE

4Press 2/3 to adjust the selected item.

5Repeat steps 3 and 4 to adjust the other items.

6Press MENU/EXIT (or MENU on the Monitor) three times to exit from the menu operations.

To reset the adjustments

After step 3 on page 16, proceed as follows:

1Press 5/∞ to move the cursor (3) to “reset.”

2Press 3.

The confirmation screen appears.

r e s e t
A r e y o u s u r e ?
" Y E S " t h e n	k e y .

" N O " t h e n M E N U k e y .

3Press 3 again to reset the adjustments.

To cancel the reset, press MENU/EXIT (or MENU on the Monitor).

Adjusting the Screen Size and Position

The screen size and position can be adjusted.

Adjusted settings can be stored for each signal type; therefore, when the same signal comes in, the stored settings are recalled.

•When adjusting the size, the size cannot be adjusted proportionally, but can be enlarged rightward (or downward) only and reduced leftward (or upward) only. Therefore, it is necessary to adjust both the size and position alternately to adjust to the appropriate size.

1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu.

		M A I N M E N U
Cursor (3)	P I C T U R E	A D J .
	S I Z E / P O S I T I O N A D J .
	F U N C T I O N S E L E C T
	S T A T U S D I S P L A Y
	E N T E R :	S E L E C T :	E X I T :
				M E N U

2 Press 5/∞ to move the cursor (3) to “SIZE/POSITION ADJ.”

*Appearing and being adjustable only when you use RGB A or RGB B input.

4 Press 5/∞ to move the cursor (3) to the item you want to adjust.

Item	Adjustment range
H (horizontal) SIZE*1		–40 to +40
H POSITION*1		Varies depending on other
		settings
V (vertical) SIZE*1		–40 to +40
V POSITION*1		Varies depending on other
		settings
DOT CLOCK*2		–10 to +10
CLOCK PHASE*2		–20 to +20
sub menu	See “To make an adjustment
	while viewing the adjustment
	bar” on the next page.
reset	See “To reset the adjustments” on
	the next page.

*1 Size and position adjustments are so related that if one is adjusted much, the other’s adjustable range will be reduced.

*2 DOT CLOCK is the function to adjust the pixel sampling number of the A/D converter to the resolution (the vertical pixel number) of the input signal.

CLOCK PHASE is the function to adjust the sampling timing (phase) to the phase of the input signal.

You can use the two functions to reduce flickering and blurring on the screen when using the RGB A or RGB B input.

5 Press 2/3 to adjust the selected item.

Note:

•During size and position adjustments, the Monitor screen may be distorted. This is normal, but not a malfunction of the Monitor.

6 Press MENU/EXIT (or MENU on the Monitor) twice to exit from the menu operations.

(To be continued on the next page)

17