JVC 0204MKH-MW-VP VIDEO A terminals option page, q COMPONENT/RGB B input terminals option page

	9			p				q
AUDIO		VIDEO	AUDIO	VIDEO		AUDIO			VIDEO
L/MONO			L/MONO			L/MONO
R	IN	OUT	R	IN	Y/C IN	R	Y/G	Pb/B	Pr/R	HD/Cs	VD
VIDEO A				VIDEO B			COMPONENT/RGB B
9 VIDEO A terminals (option) (page 12)						q COMPONENT/RGB B input terminals (option) (page 12)

AUDIO (L/MONO, R) input terminals (pin jack) Connect these terminals to the audio input terminals of a VCR, etc.

VIDEO IN terminal (BNC)

Connect this terminal to the video output terminal of a VCR, etc.

VIDEO OUT terminal (BNC)

Connect this terminal to the video input terminal of another Monitor, etc.

Note:

•Since the video output terminals on this Monitor are loop-through terminals, the devices connected to this video output terminal should be correctly terminated. Otherwise, pictures become abnormally bright or the Monitor screen gets affected abnormally.

pVIDEO B terminals (option) (page 12)

AUDIO (L/MONO, R) input terminals (pin jack) Connect these terminals to the audio output terminals of a VCR, etc.

Y/C (S video) IN terminal (mini DIN 4pin)

Connect this terminal to the S-video output terminal of a VCR, etc.

VIDEO IN terminal (pin jack)

Connect this terminal to the video output terminal of a VCR, etc.

Note:

•When both the video and S-video terminals are connected, the S-video terminal will have priority.

AUDIO (L/MONO, R) input terminals (pin jack) Connect these terminals to the audio output terminals of the other equipment.

G, B, R, HD/Cs, VD (VIDEO) input terminals (BNC) Connect these terminals to the following output terminals of a personal computer or other equipment:

–Analog RGB signal output terminals

–Horizontal sync (HD) signal or composite (Cs) signal output terminal

–Vertical sync (VD) signal output terminal

Notes:

•External sync signals are automatically detected when they come in.

•When both horizontal (HD)/vertical (VD) sync and composite (Cs) sync are connected, HD/VD sync signals will be used.

Y, Pb, Pr (VIDEO) input terminals (BNC)

Connect these terminals to the component signal output terminals of NTSC or high-vision equipment.

Note:

•When these terminals are used as the component terminals (Y, Pb, Pr)—see “Setting the COMPONENT/ RGB B Input” on page 22, external sync signals (HD/Cs, VD) cannot be used.

7