PICTURE ADJ. Picture adjustment See page, Contrast, Bright

PICTURE ADJ. (Picture adjustment): See page 16.

CONTRAST	Adjusts the contrast of the picture.
BRIGHT	Adjusts the brightness of the picture.
CHROMA*1	Adjusts the color density of the picture.
PHASE*2	Adjusts the color phase.
SHARPNESS	Adjusts the outlines of the picture.
sub menu	Displays the fine adjustment bar.
reset	Resets the Picture Adjustment Menu settings to defaults.

SIZE/POSITION ADJ. : See page 17.

H SIZE	Adjusts the horizontal screen size.
H POSITION	Adjusts the horizontal screen position.
V SIZE	Adjusts the vertical screen size.
V POSITION	Adjusts the vertical screen position.
DOT CLOCK*3	Adjusts to eliminate stripes or flickering. Use with “CLOCK PHASE.”
	Normally, no adjustment is needed.
CLOCK PHASE*3	Adjusts to eliminate stripes or flickering. Use with “DOT CLOCK.”
	Normally, no adjustment is needed.
sub menu	Displays the fine adjustment bar.
reset	Resets Size/position Adjustment Menu settings to defaults.

FUNCTION SELECT: See pages 19 to 23.

COLOR TEMP.	Adjusts the color temperature.
	Use when the picture is reddish or bluish.
ASPECT*4	Selects the horizontal to vertical ratio of the screen.
SIGNAL MODE*5	• Selects a color system (NTSC, PAL, SECAM, NTSC 4.43, PAL60) when VIDEO A or VIDEO B
	input is selected. Normally, set to “AUTO.”
	• Selects a scan system—480i, 576i, 480p, 576p, 720p, 1080/60i (1035i), 1080/50i—when
	COMPONENT input is selected. Normally, set to “AUTO.”
RGB/COMPO.*6	Selects the usage of the COMPONENT/RGB B terminals either as the COMPONENT input
	terminal or as the RGB B input terminal.
SYNC TERM.*7	Adjusts the resistance of RGB B input terminals.
reset	Resets the Function Selection Menu settings to defaults.

STATUS DISPLAY: See page 24.

Shows the input mode and signal type on the screen.

*1 Adjustable when viewing the NTSC, PAL or SECAM signal, or component signal. *2 Adjustable when viewing the NTSC signal or component signal.

*3 Adjustable when RGB A or RGB B input is selected.

*4 Not adjustable when viewing the following component signals—720/60p, 1080/60i (1035/60i), and 1080/50i. ( In such a case, “ASPECT” does not appear on the display.)

*5 Adjustable when VIDEO A, VIDEO B, or COMPONENT input is selected. *6 Adjustable when RGB B or COMPONENT input is selected.

JVC LCT1616-001A PICTURE ADJ. Picture adjustment See page, Contrast, Bright, Chroma, Phase, reset

Models: 0204MKH-MW-VP GM-V42C LCT1616-001A

PICTURE ADJ. (Picture adjustment): See page 16.

Adjusts the contrast of the picture.

BRIGHT

Adjusts the brightness of the picture.

Adjusts the color density of the picture.

Adjusts the color phase.

Adjusts the outlines of the picture.

Displays the fine adjustment bar.

Resets the Picture Adjustment Menu settings to defaults.

SIZE/POSITION ADJ. : See page 17.

H SIZE

Adjusts the horizontal screen size.

Adjusts the horizontal screen position.

V SIZE

Adjusts the vertical screen size.

Adjusts the vertical screen position.

Adjusts to eliminate stripes or flickering. Use with “CLOCK PHASE.”

Normally, no adjustment is needed.

Adjusts to eliminate stripes or flickering. Use with “DOT CLOCK.”

Resets Size/position Adjustment Menu settings to defaults.

FUNCTION SELECT: See pages 19 to 23.

COLOR TEMP.

Adjusts the color temperature.

Use when the picture is reddish or bluish.

ASPECT*4

Selects the horizontal to vertical ratio of the screen.

SIGNAL MODE*5

input is selected. Normally, set to “AUTO.”

COMPONENT input is selected. Normally, set to “AUTO.”

RGB/COMPO.*6

terminal or as the RGB B input terminal.

SYNC TERM.*7

Adjusts the resistance of RGB B input terminals.

Resets the Function Selection Menu settings to defaults.

STATUS DISPLAY: See page 24.

Shows the input mode and signal type on the screen.

*3 Adjustable when RGB A or RGB B input is selected.

*7 Adjustable when RGB B input is selected.