JVC GM-V42C manual Parts Identification Continued, Monitor Rear Views, RGB A input terminals page

Parts Identification (Continued)

Monitor: Rear Views

					OPTION	6
				9		7
				L	OUT
				(	SPEAKER
				(
				R
				9
				EXTERNAL		8
				INTERNAL
1		2	3	4		5
AUDIO			OUT
		MAKE	L
IN	RS-232C	WIRED	R
RGB A	REMOTE		AUDIO	AC IN		POWER

1RGB A input terminals (page 11)

Input terminal (D-sub, 15 pin)

Connect to the video output terminal of a personal computer.

Note:

•Use a cord as short as possible when connecting a personal computer to this terminal. (Recommended length is within 3 m.)

AUDIO IN terminal (stereo mini jack)

Connect to the audio output terminal of a personal computer.

2REMOTE terminals (pages 11 and 13)

RS-232C terminal (D-sub, 9 pin)

Connect to the RS-232C terminal of a personal computer. For the control method using this terminal, consult an authorized JVC dealer.

MAKE terminal (mini DIN, 4pin)

Connect an external control unit. (See page 13.)

WIRED terminal (stereo mini jack)

Connect a wired remote control unit to this terminal.

Note:

•When the above three terminals are used at the same time, transmitted commands through the MAKE terminal have priority over those through the other terminals.

3AUDIO OUT terminals (pin jack) (page 11)

Connect to the audio input terminals of external equipment such as an amplifier.

4AC IN terminal (page 11)

Connect the supplied power cord to this terminal.

5POWER switch (page 14)

When this switch is set to “(on),” you can turn on and off (on standby) the Monitor by using the POWER button on the remote control or the button on the Monitor.

6OPTION terminal (page 13)

Connect the power cord of the Cooling Fan Unit (not supplied) when installing the Monitor vertically.

7SPEAKER OUT L/R terminals (page 11)

Connect external speakers, such as unique JVC speakers (not supplied), etc.

8INTERNAL/EXTERNAL (built-in speaker/external speaker) selecting switch (page 11)

INTERNAL:	To use built-in speakers.
EXTERNAL:	To use external speakers.

6