Samsung HT-DT79 instruction manual Tape Counter, Recording a Compact Disc, Tape Deck

Selecting the Cassette Playback Mode

Your micro component system has three cassette playback modes which enable you to listen to both sides of a cassette automatically.

Press REV.MODE until the appropriate symbol is displayed.

•: One side of the selected cassette and then stops.

•: One side of the cassette.

The other side of the cassette and then stops.

• : Both sides of the cassette indefinitely until you press stop.

Recording a Compact Disc GB

You can record a compact disc on a cassette in two different ways:

Synchronised recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

Tape Counter

When playing a cassette, a counter is displayed to enable you to take note of the counter value at the start of each track and thus start playback at the beginning of the track to which you wish to listen.

Switch the system

1 on by pressing

POWER.

Insert a blank			Load a compact
2 cassette in Deck.		3 disc.
• Press the PUSH/EJECT button (	)	• Press the OPEN/CLOSE button
to open the cassette door, insert a		(	) to open the CD door.
cassette, and then close the cas-		• Insert a CD and press the
sette door.		OPEN/CLOSE button (		) to
• Insert the cassette with the safety		close the CD door.
tabs.

Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing COUNTER RESET.

• The counter is only displayed when a cassette is being played.

4 Press the PLAY

( ) button.

•Use the CD selection ( , ) buttons to select the desired song.

Press and hold		To stop recording,
5 button.CD SYNC.(
	)	6 press	button.

•When stopped, Press and hold the button to start the recording from the first piece of music.

•Press and hold CD SYNC.( ) button during the playback of CD to start the recording from the first part of the music being played.

TAPE DECK

55 56