Samsung HT-DS610 Listening to Radio, Remote Control Unit Press Tuner, Band button, Main Unit

43P~74P(DS610)-SEA 9/15/04 2:51 PM Page 64

Listening to Radio

You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.

	Remote Control Unit
1		Press TUNER/	2	Tune in to the
		BAND button.		desired station.

•The selection toggles back and forth between "FM" and "AM" each time the TUNER(BAND) button is pressed.

Automatic Tuning 1

Automatic Tuning 2

Manual Tuning

When is pressed, a preset broadcast station is selected.

Press and hold to automatically search for active broadcasting stations.

Briefly press to increase or decrease the frequency incrementally.

Main Unit

1 Press the Function button to select the desired band (FM, AM).

2 Select a broadcast station.

Automatic Tuning 1 Press the STOP ( )

button to select

PRESET and then press button to select the preset station.

Automatic Tuning 2 Press the STOP ( ) button

to select "MANUAL" and

then press and hold button to automatically search the band.

Manual Tuning Press STOP ( ) to select MANUAL and then briefly

press to tune in to a lower or higher frequency.

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

•

65 •

Each time the button is pressed, the sound switches between "STEREO" and "MONO". In a poor reception area, select MONO for a clear, interference-free broadcast.