Data Sheet: Xeta iHG48070A033V, 3.3V/70A Output Half Brick Series
the derating curve. For improved design marginsandenhancedsystemreliability,the power module may be operated at temperatures below the maximum rated operatingtemperature.
Heat transfer by convection can be enhancedbyincreasingtheairflowratethat the power module experiences. The maximum output current of the power moduleisafunctionofambienttemperature
(TAMB) and airflow rate as shown in the thermalperformancefiguresonthethermal
performancepageforthepowermoduleof interest. Thecurveinthefiguresisshown fornaturalconvectionandup. Thedatafor the natural convection condition has been collected at 0.3 m/s (60 ft/min) of airflow, which is the typical airflow generated by other heatdissipatingcomponentsinmany ofthesystemsthatthesetypesofmodules are used in. In the final system configurations,theairflowrateforthenatural convection condition can vary due to temperature gradients from other heat dissipatingcomponents.
©2008TDKInnovetaInc. | ℡(877)498 0099 |
iHGDatasheet20080515Revision1.1 | 12/16 |
| |
|
|