Atlas II
Jumper Settings
Atlas II 9.1GB WD SCSI ID SettingsThe following table identifies the various SCSI ID values and the jumper positions required to set them.
Drive ID | A0 | A1 | A2 | A3 |
|
|
|
|
|
|
|
|
|
|
ID 0 | OFF | OFF | OFF | OFF |
ID 1 | ON | OFF | OFF | OFF |
ID 2 | OFF | ON | OFF | OFF |
ID 3 | ON | ON | OFF | OFF |
ID 4 | OFF | OFF | ON | OFF |
ID 5 | ON | OFF | ON | OFF |
ID 6 | OFF | ON | ON | OFF |
ID 7 | ON | ON | ON | OFF |
ID 8 | OFF | OFF | OFF | ON |
ID 9 | ON | OFF | OFF | ON |
ID 10 | OFF | ON | OFF | ON |
ID 11 | ON | ON | OFF | ON |
ID 12 | OFF | OFF | ON | ON |
ID 13 | ON | OFF | ON | ON |
ID 14 | OFF | ON | ON | ON |
ID 15 | ON | ON | ON | ON |
8 of 8