DLT VS80 Tape Drive Installation and Operations Guide
10.Secure the tape drive with the mounting screws provided, either in the sides or bottom of the tape drive sled, as appropriate for the server or workstation chassis. See Figure
CAUTION Using a screw that is too short can result in inadequate clamping force. Using a screw that is too long can cause damage to the internal circuit cards. Please see the note following Figure
Figure 3-12. Securing the Internal Tape Drive in the Installation Bay
NOTE: Some servers and workstations require mounting rails for internal devices. Contact the manufacturer for specific information, as the mounting rails have varying thicknesses. Consequently, if a different screw is required to mount the tape drive, use the following guidelines.
May 2004 |