H8QI6/i-F Serverboard User’s Manual
B-2 Bootblock Recovery Codes
The bootblock recovery checkpoint codes are listed in order of execution:
Checkpoint
E0h
E1h
E2h
E6h
Edh
Eeh
Efh
F0h
F1h
F2h
F3h
F4h
F5h
FBh
FCh
FDh
FFh
Code Description
The onboard floppy controller if available is initialized. Next, beginning the base 512 KB memory test.
Initializing the interrupt vector table next.
Initializing the DMA and Interrupt controllers next.
Enabling the floppy drive controller and Timer IRQs. Enabling internal cache memory. Initializing the floppy drive.
Looking for a floppy diskette in drive A:. Reading the first sector of the diskette. A read error occurred while reading the floppy drive in drive A:.
Next, searching for the AMIBOOT.ROM file in the root directory.
The AMIBOOT.ROM file is not in the root directory.
Next, reading and analyzing the floppy diskette FAT to find the clusters occupied by the AMI- BOOT.ROM file.
Next, reading the AMIBOOT.ROM file, cluster by cluster.
The AMIBOOT.ROM file is not the correct size.
Next, disabling internal cache memory.
Next, detecting the type of flash ROM.
Next, erasing the flash ROM.
Next, programming the flash ROM.
Flash ROM programming was successful. Next, restarting the system BIOS.