SUPER MICRO Computer LSI 2108/2208 user manual Virtual Drive Definition

Page 26

LSI 2108/2208 SAS MegaRAID Configuration Utility User's Manual

5. The Virtual Drive Definition screen displays, as shown below.

Virtual Drive Definition

In the Virtual Drive Definition screen, configure the following options as needed:

RAID Level: Select the desired RAID level. The available options are:

RAID 0 (data striping)

RAID 1 (data mirroring)

RAID 5 (data striping with parity)

RAID 6 (distributed parity and disk striping)

RAID 10 (striped mirroring)

RAID 50 (striped mirroring)

RAID 60 (distributed parity with two independent parity blocks per stripe)

Stripe Size: Select the desired stripe size.

Access Policy: Select the desired data access policy.

Read Policy: Select either Always Read Ahead or No Read Ahead. Selecting Al- ways Read Ahead will improve performance during sequential reads.

Write Policy: Select between the following options:

Write-Through: Use this option to write data to both the controller cache and the drive once the data is retrieved.

Write-Back With BBU: Use this option to write data only to the controller cache, provided that a battery backup is installed and functional.

2-12

Image 26
Contents USER’S Manual Page Conventions Used in This Manual About This ManualManual Organization Europe Contacting SupermicroHeadquarters Asia-PacificPreface Table of Contents Features of the LSI 2108/2208 Controller Overview of the LSI 2108/2208 SAS ControllerHigh Performance 6Gb/s SAS InterfaceDrive Features Supported by the LSI MegaRAID Utility Functions of the LSI MegaRAID UtilityRAID 1 Example RAID Levels Supported by the 2108/2208 ControllerRAID 0 Example RAID 10 Example RAID 5 ExampleRAID 50 Example RAID 6 ExampleRAID 60 Example RAID RAID 6RAIDPage Using the LSI MegaRAID Configuration Utility Adapter SelectionLSI Configuration Utility Main Screen LSI MegaRAID Main ScreenController Properties Advanced Software OptionsController Selection Controller InformationDescription A.R.TNCQ Scan Devices Virtual DrivesVirtual Drive Properties Drives DrivesConfiguration Wizard Adding a Configuration Add ConfigurationSpan Definition Configuring Drives ManuallyAdd Drives Virtual Drive Definition Configuration Preview Logical View Logical ViewPhysical View Events Event InformationExit