SUPER MICRO Computer X8STI-F, X8STI-LN4, X8STI-3F user manual USB Wake-Up

X8STi/X8STi-F/X8STi-3F/X8STi-LN4 User's Manual

USB Wake-Up

Use JPUSB jumpers (JPUSB1/JPUSB2/ JPUSB3) to "wake-up" your system by pressing a key on a USB keyboard or clicking the USB mouse of your system. The JPUSB jumpers are used together with the USB Wake-Up fea- ture in the BIOS. Enable these USB jumpers and the USB feature in the BIOS to wake-up your system via USB devices. See the table on the right for jumper settings and jumper

connections.

Note: JPUSB1 is used for Backpanel USB ports #0/1, JPUSB2 is for Front Panel USB ports #2/3, and #4/5. JPUSB3 is used for Front Accessible USB Ports 6 and 7. When the USB function is set to Enabled in the BIOS, and a USB Wake-up jumper is set to Disabled, be sure to re- move the USB devices from the USB ports whose USB jumper is Disabled before the system goes into the standby mode.

JPUSB1 (BackPanel USB

0/1 Wake-up Enable)

Pin#	Definition
1-2	Enabled (Default)
2-3	Disabled

JPUSB2 (Front Panel USB 2/3, 4/5 Wake-up Enable)

Pin#	Definition
1-2	Enabled
2-3	Disabled (Default)

JPUSB3 (Front Panel USB

6, 7 Wake-up Enable)

Pin# Definition

1-2 Enabled

2-3 Disabled (Default)

A

A.BP USB 0/1 Wake-up

B.FP USB 2/3, 4/5 Wake-up

C.FP USB 6, 7 Wake-up

NIC4 LED

JBMC1

B

LSI 1068E

C

2-32