SUPER MICRO Computer H8QM3-2 user manual Wake-On-Ring, Compact Flash Power Headers

Wake-On-Ring

The Wake-On-Ring header is desig- nated JWOR. This function allows your computer to receive and "wake-up" by an incoming call to the modem when in suspend state. See the table on the right for pin definitions. You must have

aWake-On-Ring card and cable to use this feature.

Compact Flash Power

Headers

ACompact Flash Card Power Connector is located at JWF1. For the Compact Flash Card to work properly, you will first need to connect the device's power cable to JWF1 and correctly set the Compact Flash Jumper (JP1).

Wake-On-Ring

Pin Definitions

(JWOR)

Pin# Definition

1Ground (Black)

2Wake-up

Compact Flash

Power Header

Pin Definitions (JWF1)

Pin# Definition

1+5V

2Ground

3Signal

3-SGPIO1/3-SGPIO2

The 3-SGPIO1 and 3-SGPIO2 head- ers provide a bus between the SAS controller and the drive backplane to provide SAS enclosure manage- ment functions. Connect cables from the backplane to the these headers to utilize SAS management on your system.

SAS SGPIO Headers

Pin Definitions (3-SGPIO1, 3-SGPIO2)

Notes: NC indicates no connection.

SGPIO = Serial General Purpose Input/Output

T-SGPIO1/T-SGPIO2

The T-SGPIO1 and T-SGPIO2 head- ers provide a bus between the SATA controller and the drive backplane to provide SATA enclosure management functions. Connect cables from the backplane to these headers to utilize SATA management on your system.

SATA SGPIO Headers

Pin Definitions (T-SGPIO1, T-SGPIO2)

Notes: NC indicates no connection.

SGPIO = Serial General Purpose Input/Output