SUPER MICRO Computer H8QM3-2/H8QMi-2 Quick Reference, Jumpers Description Default Setting

Page 11

Chapter 1: Introduction

H8QM3-2/H8QMi-2 Quick Reference

Jumpers

Description

Default Setting

JBT1

CMOS Clear

(See Section 2-7)

JCF1

Compact Flash Card Master/Slave

Closed (Master)

JPS1*

SAS RAID Select

Closed (SR RAID)

JPX1A

PCI-X Slot Speed Select

Pins 2-3 (133 MHz)

JPX2A

PCI-X Slot Speed Select

Open (Disabled)

JI2C1/JI2C2

I2C to PCI-X

Pins 2-3 (Disabled)

JI2C3/JI2C4

I2C to PCI-E

Pins 2-3

(Disabled)

JPG1

VGA Enable/Disable

Pins 1-2

(Enabled)

JPL1

JLAN Enable/Disable

Pins 1-2

(Enabled)

JWD

Watch Dog

Pins 1-2

(Reset)

Connectors

Description

3-SGPIO1/3-SGPIO2*

SGPIO Headers (used with SAS)

COM1/COM2

COM1 Serial Port/Header

FAN 1-9

Chassis/CPU Fan Headers

Floppy

Floppy Disk Drive Connector

I Button*

I Button (for RAID 5 support)

IDE

IDE Drive/Compact Flash Card Connector

J1B1

24-Pin ATX Power Connector

JD1

Onboard Speaker/Power LED

JF1

Front Panel Connector

JL1

Chassis Intrusion Header

JLAN1/2

Gigabit Ethernet (RJ45) Ports

JOH1

Overheat Warning Header

JPI2C

I2C Header

JPW1/JPW2

8-Pin Processor Power Connectors

JWF1

Compact Flash Card Power Connector

JWOL

Wake-On-LAN Header

JWOR

Wake-On-Ring Header

SAS0 ~ SAS7*

Serial Attached SCSI (SAS) Ports

SATA0 ~ 5

Serial ATA (SATA) Ports

T-SGPIO1/T-SGPIO2

SGPIO Headers (used with SATA)

SIMLC

IPMI 2.0 (with virtual media over LAN) Slot

USB0/1

Universal Serial Bus (USB) Ports

USB2/3

USB Headers

*H8QM3-2 only

 

1-5

Image 11
Contents Super Manual Revision 1.1a Release Date December 4 Manual Organization About This ManualTable of Contents Table of Contents TroubleshootingAppendices BiosOverview ChecklistAsia-Pacific Contacting SupermicroHeadquarters EuropeH8QM3-2 Image Super H8QM3-2/H8QMi-2 Quick Reference Jumpers Description Default SettingCPU Serverboard FeaturesOther NVidia MCP55 Pro/IO55 Chipset System Block Diagram NEC uPD720404 Chipset OverviewMCP55 Pro Media and Communications Processor IO55PC Health Monitoring Power Configuration SettingsWake-On-LAN Slow Blinking LED for Suspend-State IndicatorBios Support for USB Keyboard Main Switch Override MechanismSuper I/O Power SupplyUnpacking PrecautionsInstallation Procedures Static-Sensitive DevicesCPU Backplates Processor and Heatsink InstallationInstalling Processors Page Mounting the Serverboard into a Chassis Installing MemorySide and Top Views of DDR Installation Front Control Panel I/O Port and Control Panel ConnectionsPower LED Connector DefinitionsATX Power Connector Processor Power ConnectorsOverheat/Fan Fail LED Power Fail LEDUSB Headers Reset ButtonPower Button Universal Serial Bus Ports USB0/1Overheat LED Power LED/SpeakerSerial Ports Fan HeadersI2C Header JLAN1/2 Ethernet PortsATX PS/2 Keyboard and PS/2 Mouse Ports Chassis IntrusionWake-On-Ring Compact Flash Power HeadersCmos Clear Jumper SettingsExplanation Jumpers I2C to PCI-E Slots VGA Enable/DisableJlan Enable/Disable I2C to PCI-X SlotsSAS RAID Select Watch Dog Enable/DisablePCI-X Slot Speed SAS Activity LED LES1 Onboard IndicatorsOnboard Power LED DP2 JLAN1/JLAN2 LEDsFloppy, IDE, Sata and SAS Drive Connections Floppy ConnectorSata Ports IDE ConnectorSimlc Ipmi Slot SAS PortsSerial ATA Sata Installing the OS/SATA DriverEnabling Sata RAID in the Bios Enabling Sata RAIDInstalling the OS and Drivers Using the nVidia RAID UtilitySata RAID Utility Main Screen Driver Installation Display Screen Installing Software DriversPage No Video Troubleshooting ProceduresBefore Power On No PowerLosing the System’s Setup Configuration Technical Support ProceduresMemory Errors Question What type of memory does my serverboard support? Frequently Asked QuestionsReturning Merchandise for Service Introduction Starting the Setup UtilityMain Menu Advanced Settings MenuBoot Settings Configuration Acpi Configuration Acpi Version Features Boot up Num-LockWait for ‘F1’ If Error OS InstallationCPU Configuration Floppy/IDE/SATA Configuration Onboard IDE Controller LBA/Large ModeFloppy B Onboard Floppy ControllerSerial ATA0/1/2 Primary/Secondary Channel DMA ModeA.R.T Bit Data TransferH8QM3-2/H8QMi-2 User’s Manual PCI/PnP Configuration Super IO Configuration CPU CPU HT Link Speed Serial Port 2 ModeHyper Transport Configuration Serial Port2 AddressNorthBridge Configuration Chipset ConfigurationBit ECC Mode Power Down ModeECC Configuration ECC Mode Dram ECC EnableSouthBridge/MCP55 Configuration USB Mass Storage Configuration USB Mass Storage Reset Delay USB Devices EnabledUSB 2.0 Controller Mode Bios Ehci Hand-OffPCI Express Configuration Remote Access ConfigurationEvent Log Configuration System Fan Monitor System Health MonitorRemovable Drives Boot MenuBoot Device Priority Security MenuExit Menu H8QM3-2/H8QMi-2 User’s Manual Beep Code Error Message Description Amibios Error Beep CodesH8QM3-2/H8QMi-2 User’s Manual Uncompressed Initialization Codes Appendix B Bios Post Checkpoint CodesBootblock Recovery Codes Uncompressed Initialization Codes Checkpoint Appendix B Bios Post Checkpoint Codes Checkpoint A9h Aah Abh B0h B1h 00h

H8QM3-2 specifications

The Super Micro Computer H8QM3-2 is a cutting-edge server motherboard designed to meet the demanding needs of high-performance computing applications. Built upon the AMD Opteron architecture, it is tailored for enterprises seeking robust server capabilities with exceptional performance, reliability, and scalability.

One of the standout features of the H8QM3-2 is its support for dual AMD Opteron 6100 series processors. This allows for an impressive processing power that can handle resource-intensive tasks and demanding workloads. With a maximum supported RAM of 512GB via 16 DIMM slots, this motherboard can efficiently manage large datasets and applications that require substantial memory.

The H8QM3-2 also boasts a versatile I/O capabilities. It includes multiple PCI-E 2.0 slots to accommodate a variety of expansion cards, ensuring that businesses can customize their servers to meet specific requirements. The motherboard features up to six SATA III ports for enhanced data transfer speeds and reliable connectivity. These ports support both RAID 0 and RAID 1 configurations, which provide options for data redundancy and enhanced performance.

In terms of network connectivity, the H8QM3-2 integrates dual 1GbE ports, allowing for efficient data transmission and reliable networking. This integration is vital for servers that rely on continuous uptime and need to manage extensive network traffic.

Another significant advantage of the H8QM3-2 is its energy efficiency. Supermicro's commitment to green computing is evident in this motherboard's design, which balances performance and power consumption. Organizations can benefit from reduced operational costs while still enjoying high-performance capabilities.

The H8QM3-2 is also designed with advanced thermal management technology. It features dedicated cooling zones and support for multiple fans to ensure that components remain at optimal temperatures, thus prolonging their lifespan and maintaining performance standards.

Security features are paramount in server technology, and the H8QM3-2 does not disappoint. Its support for hardware-based security features helps protect sensitive data and integrity against various threats.

In summary, the Super Micro Computer H8QM3-2 motherboard stands out in the realm of server solutions. With its support for dual AMD Opteron processors, extensive memory capacity, versatile I/O options, energy efficiency, and advanced thermal management, it is an excellent choice for businesses looking to upgrade their server infrastructure while maximizing performance and reliability.