SUPER MICRO Computer H8QM3-2 Onboard Indicators, JLAN1/JLAN2 LEDs, Onboard Power LED DP2

Page 34

H8QM3-2/H8QMi-2 User's Manual

Flashing IT Firmware

1.Download the appropriate IT firmware from the web site: ftp://ftp.supermicro.com/driver/SAS/LSI/Firmware/IT/

2.Unzip it to a bootable floppy or USB pen.

3.With JPS1 on (closed) boot to the device with the unzipped firmware and type "clear" to erase the SR firmware.

4.Remove AC power and open JPS1.

5.Boot to the disk again and type "H8QM32".

6.When prompted for the SAS address, type in the 16-digit SAS address labeled on the board.

7.Power off the system before restarting.

2-8 Onboard Indicators

JLAN1/JLAN2 LEDs

The Ethernet ports have two LEDs. On each Gb LAN port, one LED indi- cates activity when blinking while the other may be amber or off to indicate the speed of the connection. See the table on the right for the speed LED indications.

JLAN LED

(Connection Speed Indicator)

LED Color

 

Definition

Off

 

10/100 Mb/s

 

Amber

 

1 Gb/s

 

 

 

 

Onboard Power LED (DP2)

DP2 is an Onboard Power LED. When this LED is lit, it means power is pres- ent on the serverboard. In suspend mode this LED will blink on and off. Be sure to turn off the system and unplug the power cord(s) before removing or installing components.

SAS Activity LED (LES1)

LES1 (included on the H8QM3-2 only) is used to indicate SAS hard drive activity.

2-16

Image 34
Contents Super Manual Revision 1.1a Release Date December 4 About This Manual Manual OrganizationTable of Contents Troubleshooting Table of ContentsBios AppendicesChecklist OverviewEurope Contacting SupermicroHeadquarters Asia-PacificH8QM3-2 Image Super Jumpers Description Default Setting H8QM3-2/H8QMi-2 Quick ReferenceServerboard Features CPUOther NVidia MCP55 Pro/IO55 Chipset System Block Diagram IO55 Chipset OverviewMCP55 Pro Media and Communications Processor NEC uPD720404Power Configuration Settings PC Health MonitoringMain Switch Override Mechanism Slow Blinking LED for Suspend-State IndicatorBios Support for USB Keyboard Wake-On-LANPower Supply Super I/OStatic-Sensitive Devices PrecautionsInstallation Procedures UnpackingInstalling Processors Processor and Heatsink InstallationCPU Backplates Page Installing Memory Mounting the Serverboard into a ChassisSide and Top Views of DDR Installation I/O Port and Control Panel Connections Front Control PanelProcessor Power Connectors Connector DefinitionsATX Power Connector Power LEDPower Fail LED Overheat/Fan Fail LEDUniversal Serial Bus Ports USB0/1 Reset ButtonPower Button USB HeadersFan Headers Power LED/SpeakerSerial Ports Overheat LEDChassis Intrusion JLAN1/2 Ethernet PortsATX PS/2 Keyboard and PS/2 Mouse Ports I2C HeaderCompact Flash Power Headers Wake-On-RingExplanation Jumpers Jumper SettingsCmos Clear I2C to PCI-X Slots VGA Enable/DisableJlan Enable/Disable I2C to PCI-E SlotsPCI-X Slot Speed Watch Dog Enable/DisableSAS RAID Select JLAN1/JLAN2 LEDs Onboard IndicatorsOnboard Power LED DP2 SAS Activity LED LES1Floppy Connector Floppy, IDE, Sata and SAS Drive ConnectionsIDE Connector Sata PortsSAS Ports Simlc Ipmi SlotEnabling Sata RAID Installing the OS/SATA DriverEnabling Sata RAID in the Bios Serial ATA SataUsing the nVidia RAID Utility Installing the OS and DriversSata RAID Utility Main Screen Installing Software Drivers Driver Installation Display ScreenPage No Power Troubleshooting ProceduresBefore Power On No VideoMemory Errors Technical Support ProceduresLosing the System’s Setup Configuration Frequently Asked Questions Question What type of memory does my serverboard support?Returning Merchandise for Service Starting the Setup Utility IntroductionBoot Settings Configuration Advanced Settings MenuMain Menu OS Installation Boot up Num-LockWait for ‘F1’ If Error Acpi Configuration Acpi Version FeaturesCPU Configuration Floppy/IDE/SATA Configuration Onboard Floppy Controller LBA/Large ModeFloppy B Onboard IDE ControllerBit Data Transfer DMA ModeA.R.T Serial ATA0/1/2 Primary/Secondary ChannelH8QM3-2/H8QMi-2 User’s Manual PCI/PnP Configuration Super IO Configuration Serial Port2 Address Serial Port 2 ModeHyper Transport Configuration CPU CPU HT Link SpeedChipset Configuration NorthBridge ConfigurationDram ECC Enable Power Down ModeECC Configuration ECC Mode Bit ECC ModeSouthBridge/MCP55 Configuration Bios Ehci Hand-Off USB Devices EnabledUSB 2.0 Controller Mode USB Mass Storage Configuration USB Mass Storage Reset DelayEvent Log Configuration Remote Access ConfigurationPCI Express Configuration System Health Monitor System Fan MonitorSecurity Menu Boot MenuBoot Device Priority Removable DrivesExit Menu H8QM3-2/H8QMi-2 User’s Manual Amibios Error Beep Codes Beep Code Error Message DescriptionH8QM3-2/H8QMi-2 User’s Manual Appendix B Bios Post Checkpoint Codes Uncompressed Initialization CodesBootblock Recovery Codes Uncompressed Initialization Codes Checkpoint Appendix B Bios Post Checkpoint Codes Checkpoint A9h Aah Abh B0h B1h 00h

H8QM3-2 specifications

The Super Micro Computer H8QM3-2 is a cutting-edge server motherboard designed to meet the demanding needs of high-performance computing applications. Built upon the AMD Opteron architecture, it is tailored for enterprises seeking robust server capabilities with exceptional performance, reliability, and scalability.

One of the standout features of the H8QM3-2 is its support for dual AMD Opteron 6100 series processors. This allows for an impressive processing power that can handle resource-intensive tasks and demanding workloads. With a maximum supported RAM of 512GB via 16 DIMM slots, this motherboard can efficiently manage large datasets and applications that require substantial memory.

The H8QM3-2 also boasts a versatile I/O capabilities. It includes multiple PCI-E 2.0 slots to accommodate a variety of expansion cards, ensuring that businesses can customize their servers to meet specific requirements. The motherboard features up to six SATA III ports for enhanced data transfer speeds and reliable connectivity. These ports support both RAID 0 and RAID 1 configurations, which provide options for data redundancy and enhanced performance.

In terms of network connectivity, the H8QM3-2 integrates dual 1GbE ports, allowing for efficient data transmission and reliable networking. This integration is vital for servers that rely on continuous uptime and need to manage extensive network traffic.

Another significant advantage of the H8QM3-2 is its energy efficiency. Supermicro's commitment to green computing is evident in this motherboard's design, which balances performance and power consumption. Organizations can benefit from reduced operational costs while still enjoying high-performance capabilities.

The H8QM3-2 is also designed with advanced thermal management technology. It features dedicated cooling zones and support for multiple fans to ensure that components remain at optimal temperatures, thus prolonging their lifespan and maintaining performance standards.

Security features are paramount in server technology, and the H8QM3-2 does not disappoint. Its support for hardware-based security features helps protect sensitive data and integrity against various threats.

In summary, the Super Micro Computer H8QM3-2 motherboard stands out in the realm of server solutions. With its support for dual AMD Opteron processors, extensive memory capacity, versatile I/O options, energy efficiency, and advanced thermal management, it is an excellent choice for businesses looking to upgrade their server infrastructure while maximizing performance and reliability.