step8. On the IP Address page (Figure 12), select Specify an IP address and assign an IP to your PC in the IP Address field. If the PC is to be used as a DMZ Host, or controlled by Access Control, assign an IP to the PC from the range 192.168.1.2~192.168.1.11. Enter 255.255.255.0 into the Subnet Mask field. On the Gateway sheet, enter the BroadGuard’s IP address into the New Gateway field (the default value is 192.168.1.1). Click Add to add this value to the Installed Gateway list. Click OK
Figure 13. TCP/IP Properties-2
step9. On the DNS Configuration page, check Enable DNS. Enter your PC name into the Host field (see Finding your PC Host Name, page 25) and your BSP’s domain name into the Domain field. Enter your BSP’s domain name server’s IP address into the DNS Server Search Order field and click Add. If you don’t know your BSP’s domain name and domain name server IP address, contact your BSP to get this information
step10. Click OK. The system will ask you to restart the computer. Click Yes to complete the installation