SMC Networks SMCEZNET-16SW manual Verifying System Operation, Applications

Page 18

Quick Installation Guide

Verifying System Operation

Verify that all attached devices have a valid connection. The switch monitors the link status for each port. If any device is properly connected to the switch and transmitting a link beat signal, the Link indicator will light up for the corresponding port. If the Link indicator fails to light when you connect a device to the switch, check the following items:

•Be sure all network cables and connectors are properly attached to the connected device and the switch.

•See if your cable is functioning properly by using it for another port and attached device that displays valid indications when connected to the network.

•Be sure no twisted-pair cable exceeds 100 meters (328 feet).

Applications

This switch segments your network, significantly increasing both bandwidth and throughput. Any port on the switch can be attached to a hub (a shared collision domain) or provide a dedicated link to a single network device (such as a workstation or server). When a port on the switch is connected to a hub (a 10 or 100 Mbps repeater), the bandwidth provided by that port is shared by all the devices connected to the attached hub. However, when a port is connected to an end node or to a device that breaks up the collision domain (e.g., another switch, bridge or router), the attached device has access to the full bandwidth provided by that port.

Bridging Functions - This switch provides fully transparent bridging functions. It automatically learns node addresses, that are subsequently used to filter and forward all traffic based on the destination address. When traffic passes between devices attached to the same shared collision domain, those packets are filtered from the switch. But when traffic must be passed between unique segments (i.e., different ports on the switch), the high-speed switching fabric forwards the packets at near zero latency.

Switching Functions - Store-and-forward switching is used to forward traffic to other ports. This scheme ensures data integrity and provides a clean data stream.

Flexible Configuration - This switch is not only designed to segment your network, but also to provide a wide range of options in setting up network connections. It can be used as a simple stand-alone switch; or connected with standard repeater hubs, switches, or other network interconnection devices in various configurations.

6

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Page Page EZ Switch 10/100 User Guide DkhshTrademarks Limited Warranty SMC Networks, Inc Tesla Irvine, CA FCC Class B Industry Canada Class BEC Conformance Declaration Class B Safety Compliance Wichtige Sicherheitshinweise GermanyCompliances Table of Contents Viii Introduction Installing the Switch Description of HardwareMounting the Switch Stacking Switches on a Flat SurfaceConnecting the Switch System Making a Connection to an RJ-45 PortPowering On the Switch Verifying Port StatusVerifying System Operation ApplicationsProduct Specifications Base UnitPower and Cooling Problems TroubleshootingDiagnosing Switch Indicators InstallationPort and Cable Assignments RJ-45 Port DescriptionFor Technical SUPPORT, Call For Technical SUPPORT, Call

SMCEZNET-16SW specifications

The SMC Networks SMCEZNET-16SW is a high-performance Ethernet switch designed to meet the needs of small to medium-sized businesses. This device stands out for its robust construction and efficient design, making it a reliable solution for network connectivity.

One of the main features of the SMCEZNET-16SW is its 16 10/100 Mbps Ethernet ports, which allow for seamless networking and efficient data transfer between devices. This plug-and-play switch simplifies the connection of various devices, such as computers, printers, and servers, without the need for complex configurations. With auto-negotiation technology, it automatically detects the speed and duplex of each connected device, ensuring optimal data transmission.

The switch supports the IEEE 802.3 Ethernet standard, providing compatibility with a wide range of devices and peripherals. Additionally, it supports 802.3x flow control for full-duplex mode, which helps prevent packet loss during high traffic situations by managing data flow effectively. This feature is especially beneficial in environments where bandwidth demand can fluctuate dramatically.

In terms of performance, the SMCEZNET-16SW offers a non-blocking architecture, allowing for a maximum switching capacity of 3.2 Gbps. This capability ensures that all ports can be utilized simultaneously without any loss of speed, making it suitable for applications that require high data rates, such as video streaming and large file transfers.

Another significant characteristic of the SMCEZNET-16SW is its compact, fanless design, which leads to quieter operation and reduced power consumption. This makes it an ideal choice for office environments where noise levels are a concern. Furthermore, its energy-efficient design aligns with environmentally friendly practices, helping organizations manage their energy costs effectively.

SMC Networks also provides a reliable build quality, ensuring durability and longevity. The switch comes with a sturdy metal casing and is designed for desktop or rack mounting, offering flexibility in installation to suit various working environments. With its straightforward installation process and dependable performance, the SMC Networks SMCEZNET-16SW remains a solid choice for those looking to enhance their network infrastructure without straining their budget. Overall, this Ethernet switch offers a blend of versatility and efficiency, making it an excellent addition to any business network.
Top Page Image Contents